From Wikipedia, the free encyclopedia
Union Pacific No. 119
No. 119 replica at Golden Spike N.H.P.
Type and origin
Power typeSteam
Builder Rogers Locomotive and Machine Works (original)
O'Connor Engineering Laboratories (replica)
Serial number1558 [1]
Build dateNovember 1868 (original)
1979 (replica)
Specifications
Configuration:
 •  Whyte 4-4-0
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Career
Operators Union Pacific Railroad
Numbers119, renum 343 in 1882
Official nameUnion Pacific No. 119
DispositionOriginal scrapped in 1903, replica operational at the Golden Spike N.H.P.

Union Pacific No. 119 was a 4-4-0 American type steam locomotive made famous for meeting the Central Pacific Railroad's Jupiter at Promontory Summit, Utah, during the Golden Spike ceremony commemorating the completion of the First transcontinental railroad in 1869. The locomotive was built by Rogers Locomotive and Machine Works of Paterson, New Jersey in 1868, along with numbers 116, 117, 118 and 120. The original was scrapped in 1903, but a replica now operates at the Golden Spike National Historical Park.

Promontory Summit

No. 119 was assigned to the Union Pacific Railroad's Utah Division, carrying trains between Rawlins, Wyoming and Ogden, Utah, [2] and was stationed in the latter when a call for a replacement engine came from vice-president Thomas C. Durant, to take him to Promontory Ridge, Utah Territory, for the Golden Spike ceremony celebrating the completion of the Transcontinental Railroad. While enroute to the ceremony, a swollen river had washed away some supports to the Devil's Gate Bridge. Durant's engineer refused to take his engine across, consenting only to nudging the lighter passenger cars over the span. It held, but this left Durant and his entourage without an engine. No. 119 was sent from Ogden to take them the short distance to Promontory, where it was memorialized in photos and history faced nose to nose with the Central Pacific's Jupiter. [3]

In Andrew J. Russell's famous photograph of the Meeting of the Lines, No. 119 is seen on the right with its engineer, Sam Bradford, leaning off the cowcatcher holding a bottle of champagne up to Jupiter engineer George Booth. Bradford and Booth would later break a bottle of champagne over the other's locomotive in celebration.

Later career

After the Golden Spike run, 119 led a similar life to Jupiter, and returned to service as a freight locomotive. In 1882, 119 was renumbered to 343, [4] and was scrapped in 1903.

Replicas

The Chicago, Burlington, and Quincy Railroad's locomotive no. 35 dressed up as a stand-in for Union Pacific 119 in a Golden Spike reenactment at the 1949 Chicago Railroad Fair
The Omaha Zoo Railroad's replica of no. 119

As was the case with the Jupiter, the Union Pacific only began to acknowledge the 119's historical significance well after it was scrapped. For a 1949 reenactment of the Golden Spike ceremony staged at the Chicago Railroad Fair the Chicago, Burlington, and Quincy Railroad's locomotive number 35 was cosmetically altered stand-in for the 119; likewise the Jupiter was a proxy provided by the Virginia and Truckee Railroad.

In 1968, the Union Pacific sponsored the construction of the Omaha Zoo Railroad in the Henry Doorly Zoo, including a narrow gauge replica of the 119, built by Crown Metal Products.

The First transcontinental railroad, the National Park Service's Golden Spike site at Promontory, Utah, had exhibited representations of the 119 and Jupiter on a portion of restored track where the original ceremony was held. In this instance, the 119 was portrayed by the Virginia and Truckee's Dayton locomotive, (which is ironic because the Dayton was built by the Central Pacific Railroad's shops in Sacramento) and was displayed here until it and the Jupiter, which was portrayed by that railroad's Inyo, were sold to the state of Nevada in 1974.

In 1975, the National Park Service embarked on a project to reproduce the Union Pacific No. 119 and Central Pacific Jupiter exactly as they appeared in 1869. Since the original drawings had not survived, the Park Service initially approached Walt Disney Studios, which had previously built two steam engines from scratch for their Disneyland park's railroad, for the project. Disney declined, but recommended the O'Connor Engineering Laboratories in Costa Mesa, California, for the task. Noted railroad historian and steam engine owner Gerald M. Best served as engineering consultant to the Park Service for the project. Over 700 detailed engineering drawings were recreated, based almost entirely on the photographs taken of the engines during the ceremony. Disney animator and steam engine owner Ward Kimball did color matching and original artwork for the Jupiter and No. 119. [5] [6]

See also

References

  1. ^ Strack, Don (October 10, 2015). "UPRR Roster, 1864-1880". Utah Rails.
  2. ^ "Union Pacific Utah Division Timetables".
  3. ^ The Union Pacific Railroad: A Trip Across the North American Continent from Omaha to Ogden. New York: T. Nelson, 1900. Print.
  4. ^ "Everlasting Steam: The Story of Jupiter and No. 119 - Golden Spike National Historical Park (U.S. National Park Service)".
  5. ^ "Golden Spike" (PDF). Golden Spike National Historic Site, Brigham City, UT. National Park Service, Dept. of the Interior. Archived from the original (PDF) on October 11, 2006. Retrieved August 17, 2011.
  6. ^ Best, Gerald M. (1980). Promontory's Locomotives. San Marino, CA: Golden West Books. pp. 12–43.

External links