This article is within the scope of WikiProject Materials, a collaborative effort to improve the coverage of
Materials on Wikipedia. If you would like to participate, please visit the project page, where you can join
the discussion and see a list of open tasks.MaterialsWikipedia:WikiProject MaterialsTemplate:WikiProject MaterialsMaterials articles
This article is within the scope of WikiProject Physics, a collaborative effort to improve the coverage of
Physics on Wikipedia. If you would like to participate, please visit the project page, where you can join
the discussion and see a list of open tasks.PhysicsWikipedia:WikiProject PhysicsTemplate:WikiProject Physicsphysics articles
This article has overlapping content with other pages and work is needed to identify where and how overlapping topics are addressed differently on these pages and how/where/whether they reference each other.
This article is a lot of blaa. Where is definition? — Preceding
unsigned comment added by
188.146.96.48 (
talk) 16:05, 10 January 2017 (UTC)reply
Tension - units of measurement
The page on tension requires units of measurement N/m
It would also be useful to indicate that in some circumstances - such as in the determination of plate vibration characteristics (for example, analysis by Timoshenko) it is more appropriate to use tensile stress with units of N/m^2
In a microphone diaphragm - the "tension" or stress in the diaphragm can be characterised by both tension N/m or tensile stress N/m^2
From a measurement point of view it is practical to measure the diaphragm tension N/m
From an analysis point of view it is useful to use the units N/m^2
It is also worth pointing out that tensile stress and Pressure (distributed over a diaphragm surface) both use the units N/m^2
georgerai at hotmail dot com
The magnitude of the force of tension typically increases with the amount of stretching. For small stretching, the force is often described by Hooke's law.
If this means that the amount of stretch usually increases with tension, than we should change it to say that. I think this is confusing.
69.122.62.231 (
talk) 21:52, 8 July 2008 (UTC)reply
I agree with above.
Tension really relates to force per unit length (eg surface tension). The main article on tension claims that it is the same as force, eg reactive force in a string holding a weight. Tension should be differentiated from Stress also.
203.206.65.62 (
talk) 13:37, 31 July 2008 (UTC)reply
This is a high-school Physics definition of tension -- a force applied by a string/cable to some object. The article neither defines tension clearly (so as to preclude other definitions) nor does it elucidate clearly exactly what it is. The definition itself needs work. —Preceding
unsigned comment added by
Munshisan (
talk •
contribs) 17:36, 13 October 2010 (UTC)reply
I do not think tension is force, because it is a not a vector. It is a scalar function of position along a string or other one dimensional continuous material. Tension has units of force, e.g. Newtons. The talk page seems to have general agreement that the existing page is wrong and wishing for someone to take a brushstroke at it. I'm willing! MIT '91 Course VIII!
--
Sustain4people (
talk) 03:34, 27 April 2014 (UTC)Sustain4peoplereply
Why is tension not a force and thus Vector? That's why I have always learned since High School! There is also a discussion on Quora[1]EvanCamilleri (
talk) 18:13, 17 November 2019 (UTC)reply
this article is very usefull
Tension isn't a force, that much should be readily apparent, since it doesn't have a direction, but only an axis. The first two paragraphs don't say anything about tension, merely talking clumsily about free-body diagrams, and the last paragraph about string theory is totally wtf. Unfortunately, I'm not smart enough to fix it; if I understood continuum mechanics, I wouldn't be whining on the talk page. But someone who knows better shouldn't hesitate to come along and replace the whole thing with something that makes sense.
24.91.116.134 (
talk) 21:47, 20 February 2011 (UTC)reply
Quite. I guess I think it should follow the K.I.S.S. (Keep It Simple, Stupid) principle, and simply give the obvious distinction between tension and compression (and maybe mention shear). It might be worthwhile to outline the important distinction between structures in compression and in tension ("
strength of materials"). Then wikilink to the
stress tensor, which is really the key step beyond, but mathematically much more complex. I would suppress the
string theory material altogether, as uselessly specialized and confusing to the vast majority of readers, and reachable through the stress tensor link for others.
Wwheaton (
talk) 22:08, 25 February 2011 (UTC)reply
Tension absolutely is a force (or set of forces). Consider a string from A to B to C. If you pull A to the left and C to the right, this creates a tension in the string. The part AB exerts an attractive force on the part BC (pulling BC to the left). And the part BC exerts an attractive force on the part AB (pulling AB to the right). Remember for every action (force) there is an equal and opposite reaction. The mere fact that these are opposite to each other does not mean that they "cancel out" to nothing (or no direction). Just consider what would happen if you suddenly cut the string at B — AB and BC would separate which shows that they were being held together by force before the cutting.
At the molecular level, the tension is composed of electrostatic attraction and electron exchange forces.
JRSpriggs (
talk) 11:37, 26 February 2011 (UTC)reply
Hmmm. But a set of 3-vectors is not a 3-vector, and a set of forces is not properly "a force", no? And even in the simplest one-dimensional case of a fiber or string, you have to have at least two opposing forces (two vectors, adding to sum to the zero vector) to have a non-zero tension. For a single unbalanced force (as, if you cut the string), the tension becomes zero. The
stress tensor can certainly be described in terms of a set of force vectors, but is not a 3-space vector itself. I think that is probably what
24.91.116.134 (
talk) had in mind, and why I agreed with him. (Of course a set of vectors can be regarded as a higher dimensional vector in a different abstract vector space, and a tensor is a vector from that point of view, but I think that is not what we are talking about here, yes? I hope we agree that a set of forces is not "a force"?) So I think calling tension "a force" is an imprecise blurring of terminology, likely to confuse.
Wwheaton (
talk) 03:22, 28 February 2011 (UTC)reply
I agree with you Wwheaton, "tension" and "compression" are not forces. I'm an engineer, so I don't understand all of the 3-vector and tensor stuff you are talking about, but from my more practical POV we engineers discuss items being under compression or tension, without regard to the forces. However, the term can be used to describe a force, e.g. "a tensile force", but I still wouldn't call "tension" or "compression" a force.
Wizard191 (
talk) 19:24, 4 March 2011 (UTC)reply
I think 90% of readers coming to this topic will be looking for the simplest, engineering level explanation. The next step beyond that is the
stress tensorof continuum mechanics. Deeper levels still of physics and mathematics (really beyond my everyday competence), are the
Maxwell stress tensor of electromagnetism and the
stress–energy tensor of
General Relativity, which would finally connect to
string theory. In my opinion we ought to give a clear and simple explanation here of that first level (also clearly explaining the distinction between "stress" [ie, force fields in materials] and "strain" [geometric deformation]), plus a few sentences to explain the need for the next level (the
stress tensor, which handles shearing and twisting forces in materials), and just link out to our WP articles on the EM & GR concepts, that are related generalizations, but more distant for almost everyone. The lovely thing about
hypertext is of course that we do not have to clutter up this article with every detail and lose the central simplicity, but can simply link to the more difficult material, only warning readers that it is there if they need to study it. Those articles already exist, in all their glory.
Before reforming the article, does this outline seem right to other editors? That is:
Define and explain the core concepts (compression, tension, stress, strain, shear, torsion) at the first-year college physics level,
briefly describe the stress tensor of continuum mechanics as needed for a more rigorous and complete treatment, and then
simply give mention to the further realms, with links (or "See also" items).
Yeah, I'd been thinking about that too. It seems to me that maybe neither tension nor compression really deserve separate articles, but should be defined in a more general article (including stress, strain,... ?? etc); maybe what our engineering colleagues would call "
strength of materials", maybe then with links in disambiguation pages, to resolve searchers to the place they want to go. I think it might be good to wait a week or so and see if we get input from other editors, as other areas we haven't thought of may be involved.
The main picture at the top right mislabels the force of the scaffolding acting on the earth and vice versa.
Also, the last paragraph in "System under net force" needs to be rewritten. The second to last sentence states, "If body A has greater mass than body B, m_1 > m_2." A sentence fragment if I've ever seen it. It's also a little unclear how that was supposed to tie into the last sentence which begins with a, "Therefore," which does makes sense if placed after the third to last sentence setting up the forces used in that last sentence. Then the fragment could either be placed at the end and expanded/finished or removed. I hate to simply remove it because it is beginning a good thought. — Preceding
unsigned comment added by
Rical Jasan (
talk •
contribs) 01:23, 21 September 2012 (UTC)reply
In the third paragraph, ″tension is not a force″ should be ″tension is not a fundamental force.″ Otherwise, there seems to be a contradiction to the opening sentence which contains ″tension describes the pulling force exerted by each end of a string.″ Some reference to electromagnetic forces between particles being pulled apart as opposing forces acting on opposite ends of the string might be included. However, most textbooks do not obfuscate the topic with this distinction. — Preceding
unsigned comment added by
Physics247 (
talk •
contribs) 21:46, 23 September 2015 (UTC)reply
Wiki Education assignment: 4A Wikipedia Assignment
This article was the subject of a Wiki Education Foundation-supported course assignment, between 21 August 2023 and 16 December 2023. Further details are available
on the course page. Student editor(s):
Alana1132 (
article contribs). Peer reviewers:
Tortuga424,
Achagoyan.
— Assignment last updated by
Kmijares (
talk) 22:40, 15 November 2023 (UTC)reply