PhotosLocation


SS_Naramata Latitude and Longitude:

49°30′08″N 119°36′41″W / 49.502159°N 119.611488°W / 49.502159; -119.611488
From Wikipedia, the free encyclopedia

Naramata
Sicamous (sternwheeler) at Penticton BC with tug, c1920.jpg 116 KB
SS Naramata and SS Sicamous at Penticton, 1920
History
Canada
Namesake Naramata
Owner
  • Canadian Pacific Railway (1914–c.1967)
  • Kettle Valley Railway Heritage Society (1991–2001)
  • S.S. Sicamous Restoration Society (2001–) [1]
Builder Western Dry Dock and Shipbuilding Company [1]
CostCA$43,000 [1]
Completed20 April 1914 [1]
Out of serviceAugust 1967 [1]
Status Museum ship
General characteristics
Tonnage149.94  GT (73.67 registered) [1]
Length98 ft (30 m) LOA (89.8 ft (27.4 m) registered) [1]
Beam
  • 19.5 ft (5.9 m)
  • 43 ft (13 m) guards [1]
Height53 ft (16 m) [1]
Draught5.5 ft (1.7 m) [1]
Depth8 ft (2.4 m) [1]
Installed power
  • 10.5 ft × 9.5 ft (3.2 m × 2.9 m) Scotch Marine Boiler
  • Fore-and-aft, compound jet-condensing
  • 12 in × 18 in (30 cm × 46 cm) and 26 in × 18 in (66 cm × 46 cm) [1]
Propulsion
  • 6 ft 5 in (1.96 m) four-blade screw
  • 150 ihp (110 kW) (27.3 hp (20.4 kW) nominal)
Speed
  • 12 mph (19 km/h)
  • 7 mph (11 km/h) towing [1]

SS Naramata is a steam tug commissioned by the Canadian Pacific Railway (CPR) company. She pushed barges and broke ice on Okanagan Lake from 1914 to 1967. After over 50 years of service, the boat was eventually retired and left to rest in Penticton beside her sister ship, SS Sicamous. In 2001, she was purchased by the S.S. Sicamous Restoration Society and is currently undergoing extensive renovations. [2] Naramata is the only interior steam tug to be preserved in the province of British Columbia, Canada. [1]

Manufacture

Built for CPR, the hull, engine, boiler, and steel fittings of Naramata were pre-manufactured in Port Arthur, Ontario (now Thunder Bay) by Western Dry Dock and Shipbuilding Company, with final assembly taking place in Okanagan Landing. [3] Construction began in September 1913 and was completed by the 20th of April in 1914. Upon completion, the total cost was CA$43,000 [1] and she was named after the village of Naramata, a town which at that time was responsible for producing a large portion of the valley's fruit supply. [4]

Crew

The crew aboard Naramata consisted of 11-13 men: [1] a captain or first officer, a pilot, two deckhands, a chief engineer, a second engineer, two firemen, one bargeman, and a cook who also served as a steward. [5] The ship was the first on Okanagan Lake to have a flushing toilet and was equipped with a functioning shower. Due to the dirty nature of the job, crew members were required to shower at least once a week. Often, it was a joke that the crew members were considered to be some of the "cleanest and dirtiest" on the lake.

The role of SS Naramata

Naramata would occasionally carry passengers (maximum 22) up or down Okanagan Lake, but she was mainly employed as a tugboat for the Canadian Pacific Railway. [1] CPR tugboats not only pushed and pulled barges filled with valuable goods, but in the winter months they would work as icebreakers, clearing the way for other larger and often wooden-hulled passenger ships. Naramata would often run ahead of Sicamous with crew members leaving a cardboard trail as a way to mark the clear path. More commonly, however, was the barge service. CPR tugboats could push up to two barges at once, and with barges capable of holding up to ten railcars at one time this was no small feat. When transporting two barges, Naramata would be wedged between them from astern, resulting in a "V"-shape that allowed for easy maneuvering. Alternately, barges could also be pulled from behind the tugs. [6]

Retirement

Naramata was retired in August 1967. After her retirement, she was kept at Okanagan Landing and passed through a variety of owners. [7]

Restoration

In 1991, Naramata was sold to the Kettle Valley Railway Heritage Society and the City of Penticton. On October first of that same year, she was moved to Penticton where she remained afloat beside Sicamous until 1993. [8] Upon discovering that the hull had begun to corrode, she was immediately beached in order to prevent sinking. [9] As of 2014 she is sitting in a pool of water with hopes to beach her permanently next to Sicamous.

In 2001, Naramata was purchased by the S.S. Sicamous Restoration Society, [2] and by 2003 the Society had begun to clean and repaired the damaged ship. This included the removal of three tons of coal and asbestos, general carpentry and safety repairs, and the installation of a steel staircase to allow for easier public access. In 2004 a CA$90,000 grant was awarded to the Society by the Western Economic Diversification Fund, a federal government program. This permitted further restoration of the ship and she received a deep cleaning and a fresh coat of paint. This was followed by the restoration of the pilothouse, some crew cabins, the replacement of numerous windows and the implementation of a security system.

References

  1. ^ a b c d e f g h i j k l m n o p q Turner 1995, p. 33.
  2. ^ a b Hobson & Associates (2005). "Penticton Heritage Strategy" (PDF): 18. {{ cite journal}}: Cite journal requires |journal= ( help)
  3. ^ Turner 2007, p. 165.
  4. ^ Turner 1995, p. 28.
  5. ^ Turner 1995, p. 30.
  6. ^ Turner 1995, p. 60.
  7. ^ Turner 1995, p. 63.
  8. ^ Turner 1995, p. 68.
  9. ^ Turner 2007, p. 279.

Bibliography

  • Turner, Robert (1995). The Sicamous & the Naramata. Victoria: Sono Nis Press. ISBN  1-55039-057-0.
  • —— (2007). Sternwheelers and Steam Tugs. Victoria: Sono Nis Press.


49°30′08″N 119°36′41″W / 49.502159°N 119.611488°W / 49.502159; -119.611488