Rock climber with a helmet, harness & rope, and a
traditional climbing "rack" of
protection devices on their harness and additional
gear sling, which contains SCLDs, nuts, a tricam, and quickdraws
Advances in equipment are a key part of the
rock climbing history, starting with the
climbing rope. Modern devices enable climbers to perform tasks that were previously done manually and with greater control (in all conditions) and less effort. Examples of replacements include the harness (replaced tieing the rope around the waist), the
carabiner (replaced many
knots), the descender/abseil device (replaced the
dülfersitz), the
ascender (replaced the
prusik knot), the belay device (replaced the
body belay), and
nuts/
hexes (replaced
chockstones).
Modern equipment includes
dynamic ropes,
plyometric training tools, advanced
spring-loaded camming devices (SLCDs) for protection, and advanced rope control devices such as
self-locking devices (SLDs), progress capture devices (PCDs), and
assisted braking devices (ABDs). Modern equipment uses advanced materials that are increasingly more durable, stronger, and lighter (e.g.
spectra/dyneema and
aluminum alloys). The equipment must meet specific standards (e.g. the
UIAA standards) for strength, durability, and reliability, and must be certified and tested against such standards (with individual pieces carrying such certification marks).
Use and certification
Type of climbing
The rock-climbing equipment needed varies materially depending on the type of rock climbing being undertaken. Starting from the least equipment-intensive type of climbing, the general equipment needs are as follows:[1]
Top rope climbing (and its
competition speed climbing variant) adds a rope, harness, and belay device, but no general climbing protection outside of that which is used to create the anchor point at the top of the climb from which the top rope is hung (which is usually done with carabiners, slings, and/or cord).[2]
Traditional climbing requires most of the equipment of the above disciplines but with the addition of extensive climbing protection equipment (nuts, hexes, and SCLDs), which the climber will insert while lead-climbing the route. The weight of the extra protection may require a stronger harness and/or a
gear sling.[2]
Multi-pitch climbing, which can be done in sport or traditional formats, requires added rope devices like ascenders and descenders for moving up and down fixed-ropes. The
big wall variant requires heavy-duty rope devices for carrying more gear such as
portaledges and provisions, which are carried in
haul bags.
Rope solo climbing is done in many formats (sport, traditional, multi-pitch), and needs an extensive range of rope devices as every pitch needs to be solo climbed (SLDs), descended back down (descenders), and then re-ascended (ascenders).[3][4] The simpler variant of
top rope solo climbing, only requires the SLDs.[5]
Aid climbing (and its
clean aid climbing variant) is usually done in a traditional format and also more likely on multi-pitch (and big wall) routes. In addition to the standard equipment for such routes, aid climbing uses specialist equipment such as
aiders and
daisy chains, as well as
hammers for
pitons and
coppeheads.[6]
Certification
Rock-climbing equipment is broadly classed as Personal Protective Equipment (PPE).[7] The
UIAA was an important early body in setting standards (and pre-1995 it was the only body setting standards) for equipment, and the UIAA Safety Commission continues to play a central worldwide role in this area.[8] The European
CEN is also an important major regulator of PPE, and which works closely with the UIAA Safety Commission through its CEN Working Group for Mountaineering Equipment.[9][10]
North America has fewer specific regulations as rock-climbing equipment as it is not classed as military or professional PPE and thus does not fall under OSHA regulation;[10] in effect, the UIAA and CEN have become the most important bodies for setting standards and regulating rock-climbing equipment worldwide, and most major manufacturers (and distributors) produce equipment certified and stamped with UIAA and
CE marking.[10] Post Brexit, the United Kingdom use "UKCA" certification in lieu CEN.[7]
Ropes and slings
Ropes
Modern
climbing ropes are 50–80 metres (160–260 ft) in length (the longer versions are for multi-pitch climbing), and have a
kernmantle construction consisting of a core (kern) of twisted
nylon fibers and an outer sheath (mantle) of woven colored coarse nylon fibers. They are either
dynamic ropes, which can stretch to absorb the energy of a falling climber, or are the less expensive but more hard-wearing
static ropes, which are only for use in constant-load situations such as descending (e.g. abseiling) and ascending (also called
fixed-roping).[1][11][12]
Some climbers will use a single climbing rope of full-thickness (circa 9–11 mm), whereas others will use
double ropes (or "half-ropes") to reduce
rope drag (e.g. they are not both clipped into each anchor or protection point), which have less thickness (circa 8–9 mm) to limit the weight of the extra rope. Where two thinner ropes are used that are both clipped into each anchor or protection point (i.e. it is not to reduce rope drag, but instead to have a backup rope for long climbs), it is known as
twin roping, which are (circa 7–8 mm).[1][11][12]
Slings
Modern
webbing (or "tape"), is made of strong tubular nylon and/or the even stronger
spectra/dyneema material. Climbers use webbing that has been sewn (using a certified standard of reinforced stitching) into various lengths of closed loops called "
slings" (or "runners") that can be used in a wide range of situations, including wrapping around sections of rock (for abseiling, or creating belay anchors, or as passive protection), or tied to other pieces of equipment (often via carabiners) to create a longer version of a quickdraw or even a makeshift lanyard.[1][11][13]
Slings can be made into more complex pieces of equipment such as the
daisy chain, which is used in aid climbing,[6] and the
Personal Anchor System, which is used in securing a climber to a fixed anchor point.[14]
Cords
While lengths of webbing can be tied via a knot (e.g. a
water knot) to create custom-length loops (instead of the pre-sewn fixed-length slings), their load-bearing capacity can be materially reduced making them less safe. Climbers instead use
cord (or "accessory cord"), which is a length of thinner (circa 4–8 mm) static
kernmantle rope, tied via a
double fisherman's knot into closed loops of any size.[1][11]
Cord loops (also known as "
cordelettes") serve a wide variety of functions in rock climbing including creating friction
prusik knots for ascending or gripping fixed climbing ropes (usually using thinner circa 5–6 mm cord), or for attaching to, and equalizing forces across, multiple fixed anchors points,[15] such as when setting up abseil or belay anchors on multi-pitch climbing routes (usually using thicker circa 7–8 mm cord).[1][11]
Rope connectors
A number of devices help climbers securely attach items to the rope, including themselves (e.g. via a harness) and protection devices (e.g. via carabiners and quickdraws). Before their invention, climbers used alternative techniques such as looping the rope around the body in lieu of a harness (e.g. the
body belay), or around the rock in lieu of protection, as well as using various
climbing knots to link ropes and anchor points together.[1]
Carabiners
Carabiners are closed metal clips with spring-loaded gates that are used as connectors between the rope and various devices. Modern carabiners are made from a lightweight but strong
aluminum alloy that can withstand the load of a fall. Carabiners come in various shapes (e.g. the asymmetric/offset D-shape is the most common), and gate styles (e.g. a straight gate or a bent gate). A particular variation is whether the gate is locking (for extra security for example when belaying, but making the carabiner heavier and slightly tricker to clip into) or non-locking (the easiest to clip into and out of for example when leading a bolted sport climbing route, but with the risk that the gate may unintentionally open).[11][1][16]
Harnesses
Climbing harnesses are used for connecting the rope to the climber (via a "belay loop" on the harness). Harnesses are made of strong materials to specific strength guidelines that can withstand the load of a major fall. There are many types of harness designs (and materials used) depending on the type of climbing undertaken. Examples include minimal "sit" harnesses for sport climbing (e.g. they require little in the way of gear-carrying loops), lightweight and detachable leg-loop harnesses for alpine climbing (e.g. to fit around heaving winter clothing), padded harnesses for big wall climbing (to give comfort for long hanging belays and abseils), and chest/full-body harnesses for children and when carrying heavy loads.[11][1]
Lanyards
Lanyards (or "teather", or "via ferrata set") are much longer versions of
quickdraws that attach from a harness to a rope (or other anchor points, such as a metal cable). The difference is that lanyards are much stronger than quickdraws and are capable of withstanding
fall factors of 2 as found on
via ferrata or on
multi-pitch climbing routes. They are often made from materials that can absorb dynamic energy and often come with additional optional fall
energy absorption devices, and lanyards that have had heavy falls often have to be discarded. Lanyards are also constructed to be sufficiently flexible to resist being twisted.[1][17]
Personal Anchor Systems
A sub-class of lanyards is the Personal Anchor System (PAS), which is a section of rope or interconnected chains of slings, which are used to tie the harness to an anchor point such as a belay station. Traditionally, climbers would tie their harness to anchors using part of the climbing rope; however, the PAS has become popular as a way to avoid reducing the effective length of the climbing rope, and to use a more straightforward and direct connection.[18]
Quickdraws
Quickdraws are used by climbers to connect ropes to fixed items such as bolted anchors in sport climbing, or protection devices in traditional climbing. The quickdraw consists of two non-locking carabiners connected together by a short, pre-sewn loop of webbing. They are used to reduce the friction and drag between the rope of the fixed item (i.e. instead of just clipping into a carabiner clipped into the bolt); in
competition climbing the quickdraws are already hanging from the bolts, which is called pinkpointing in
sport climbing (i.e. instead of the lead climber carrying the quickdraws, they are already in-situ). The quickdraws used on advanced sport and competition climbing routes often have a "bent-gate" on the lower carabiner to make clipping-in easier.[11][19]
Rope devices
A number of devices are used for controlling the rope (belay devices and self-locking devices), moving up the rope (ascender devices), or moving down the rope (rappel/abseil or descender devices). These actions were historically done by climbers with no devices (e.g. the
body belay for belaying, the
dülfersitz abseil for descending, and the
prusik knot for ascending), and the devices help with control and safety in all conditions (e.g wet or icy ropes).[1]
Ascenders
Ascenders (also called "jumars" or "
crolls" after popular brands) are mechanical devices to enable a climber to move up a
fixed rope (e.g. a static rope that is hanging from a fixed anchor). Ascenders perform the same basic function as friction or prusik knots made from
cord but far less effort and concentration are needed to use them (e.g. tired climbers at high-altitude), they can handle much heavier loads (e.g. climbers with ruck-sacks), and they are more reliable in all conditions (e.g. on wet and icy ropes). The ascender uses an internal cam that allows the device to slide freely in one direction but tightly grip the rope when pulled on in the opposite direction. To prevent the ascender device from accidentally falling off the rope, a locking carabiner is also used.[14]
Belay devices
Belay devices are mechanical friction-brake devices used to control the climbing rope(s) when
belaying a climber. Their main purpose is to allow the rope to be locked-off/fully-braked with minimal effort when arresting a climber's fall. There are many kinds of belay devices, such as the original passive braking devices like "sticht plates" and the later "tubers/tubulars" (e.g. the original Black Diamond ATC, or the Petzl
Reverso).
Modern belay devices include auto-block devices (e.g. the
GiGi) allowing the belay device to be attached to a separate anchor point (e.g. and not to the belayer, which is useful for bringing up the second-climber on multi-pitch routes), and active assisted-braking devices (ABDs) that will self-lock with sudden rope movements (e.g. the Petzl
GriGri or the Wild Country
Revo). Some passive belay devices may also be used as descenders for
abseiling.[20]
Indoor climbing walls can provide in-situ fixed mechanical
auto belay devices that enable the climber to
top rope a route alone; more recent
lead auto belay models allow the climber to also lead climb the route alone.[21]
Descenders
Modern descenders
Advanced figure-8
Petzl I'D self-locking
Descenders (or
abseil devices) enable a climber to abseil (or rappel) down a fixed rope (e.g. a static rope that is hanging from a fixed anchor). They perform the same basic function as the
dülfersitz abseil but with more control and less effort. The classic passive descender, and still widely used, is the
figure-eight, although it is offered in more complex variations with "ears" and "wings" to prevent the rope from locking up.[14]
Many passive belay devices can be used as descenders, such as tubers/tubulars. Some modern descenders come with self-locking device (SLD) features that will grip the rope in the event of an uncontrolled fall (e.g. the
Petzl I'D S [
de]).[14] Heavy-duty descenders such as
abseil racks are used for greater control and friction when carrying heavy loads and/or in very wet or icy conditions (e.g. big wall climbing and caving). The modern technique is to use a descender with a
Personal Anchor System.[14]
Self-locking devices (SLDs), also called progress capture devices (PCDs), are the terms given to the broader class of rope devices that allow the climbing rope to move more freely in one direction but will lock quickly if the rope tries to move in the opposite direction. Their basic action means that several can also be used as emergency ascenders or assisted-belaying devices (ABDs), but they come in a broad range for a variety of uses (e.g. as a hauling or rescue pulley, like the Petzel Traxion).[22]
The most complex use is for
rope solo climbing, for which devices such as Wren's Silent Partner, the Petzel GriGri, and the Wild Country
Revo have been used (rope solo climbing requires the widest range of rope devices including ascenders and descenders),[3][4] or the more straightforward
top rope solo climbing, for which the Petzel Micro Traxion, and Camp Lift have been used.[5]
Protection devices
As discussed in
types of climbing, rock climbing protection devices are mainly used in traditional climbing and in sport climbing (both of which can be done in single and multi-pitch formats). In addition, clean aid climbing also uses many of the traditional climbing protection devices.[2]
Temporary
Temporary protection devices (also known as pro, gear or the rack), provide the means to place temporary anchor points on the rock to which a
lead climber can clip their rope (via a quickdraw) when
traditional climbing; they also can be used for anchor points for belaying and for abseiling. The devices are categorized as being passive (i.e., they maintain a static position throughout), or active (i.e. they dynamically move or adjust in the case of a fall).[2]
Nuts (also "stoppers", "wires" or "chocks"). The most common passive protection, are small curved blocks of strong
aluminum alloy attached to a loop of wire. Nuts are used by wedging them into narrowing/tapering cracks (they do not work well in wide or parallel cracks) and then giving them a tug to set them in place.[2][23] Nuts are come in many varieties (e.g. offset-shaped HB nuts, micro nuts, and brass RP nuts).[24] In areas where Australian
carrot bolts are common, the wire loop has been used as an emergency substitute for a bolt plate (i.e. like a
rivet hanger).[25]
Hexes. These are hollow asymmetrical hexagonal tubes attached to a loop of
cord (particularly for large hexes) or wire. Often wider than nuts, their asymmetrical shape allows their use in parallel and even widening cracks. They are placed like a nut ideally into a narrowing section of the crack and any fall will cause the hex to twist in its placement, thus exerting sideways force on the wall of the crack. Modern climbers tend to use SCLDs over hexes.[2]
Tricams. These are shaped aluminum blocks attached to lengths of webbing tape (like a nut). The block is shaped so that pulling on the tape makes it "cam" against the crack walls, gripping the rock tighter in a similar fashion to a Hex. Tricams may also be placed similarly to a nut, relying only on the constriction of a crack. Tricams are not as easy to place or remove as an SLCD but they can fit into narrow cracks and pockets, in some cases being the only type of protection that will work on a particular feature. Tricams are typically much cheaper and lighter than SCLDs. Less frequently in use today.[2][26]
Spring-loaded camming devices (SLCDs, or "
friends", "
camalots"). These consist of two to four aluminum
cams mounted on a spring-loaded axle (or two adjacent axles), in such a way that pulling on the shaft connected to the axle forces the cams to narrow so they can be inserted into small cracks. Once the SLCD is inserted into the crack, its cams will maintain a constant camming angle of 13.75 degrees against the walls of the crack. SCLDs are overwhelmingly the most popular form of active protection device.[2][27]
Big Bros (or tube chocks). These are large hollow telescopic aluminum tubes manufactured by Trango whose width can be dynamically adjusted to fit across large
off-width cracks that are too wide for standard SLCDs.[28][29]
Removable bolts (or RBs). These are a type of SLCD for insertion into pre-drilled bolt holes, but instead of using cams, the system uses a metal tube that once inserted expands to grip against the walls of the hole. Less frequently in use, their main application is for climbers creating bolted routes.[2]
Fixed
Fixed protection devices are permanent in-situ anchors to which a lead climber can clip their rope (via a quickdraw) when
sport climbing; they also can be used to create anchor points for belaying and for abseiling. The main types are:[2]
Bolts. Steel 1/2-inch
expansion bolts are pre-drilled into the rock with a hand drill and tightened with a torque wrench (some versions use a type of glue to anchor the bolt).[2][30] Before insertion, a
bolt hanger is attached into which carabiners (and quickdraws) can be clipped. Modern stainless steel (or the more expensive titanium, for even greater durability and/or harsher environments like sea cliffs) bolts last for over a decade, but have a finite life span after which they must be replaced.[31] Some bolted crags use fixed
permadraws, which are in-situ wire quickdraws that are permanently attached to the bolt-hangers.[32]
Pitons. Before bolts, climbers (and particularly big wall aid climbers and alpine climbers) used pitons, which are steel spikes (older versions were not steel) hammered into cracks in the rock that have an eye-hole for attaching a carabiner (some came with pre-installed metal rings). Unlike bolts, pitons need a crack into which they can be hammered, and come in a wide variety of shapes and designs (e.g.,
angles,
knifeblades, lost arrows) to fit various cracks, and even micro-cracks like
RURPs. Pitons have been largely replaced by the stronger bolts as the fixed protection of choice, but are still an important part of aid climbing (but not clean aid climbing, which rules out any use of hammers).[2][33]
Aid equipment
Aid climbing uses several of the above devices but in a way that gives "aid" to the aid climber in ascending (e.g. pulling up on pitons and hooks). There are also a number of other pieces of equipment that are more exclusively associated with aid climbing.[6]
Aiders (or the French etriers). These are short 5–6 rung ladders made of lightweight webbing, which are a central part of the technique of
aid climbing where they are normally used in pairs (e.g. the aid climber stands one on aider while clipping in the higher aider). Aiders can also come as "offset style" aiders (e.g. 5–6 stirrup-loops arranged on either side of a central rope) and as the light-weight "adjustable style" aiders (e.g. the climber can create customized rungs).[6]
Daisy chains. These are 1 to 1.5 metre-long webbing
slings that have multiple small loops (for carabiner attachment) which are made by stitching the sling at 8 to 15-centimetre intervals. Like aiders, daisy chains are also a central part of aid climbing where they link the harness to the aider (see above); care has to be taken not to clip into the loops incorrectly, which can cause the daisy chain to fail and rip apart (e.g. when trying to use as a
Personal Anchor System).[6]
Copperheads (or "bashie"). A type of soft-metal nut (usually made from copper), which can be hammered into very thin cracks that are too small for even the narrowest piton. Copperheads are only used in aid climbing and their low strength means that they can only handle the "static bodyweight" of an ascending aid climber, and will likely fail where the climber makes a dynamic fall. At times, climbers will "clean out" build-ups of copperheads on an aid climbing route.[6][34]
Hooks. These are steel hooks of various shapes (e.g. bat hook, talon hook, grappling hook, etc.,) that are hung from cracks and flakes (e.g. the
fifi hook and
skyhook). Mostly used in aid climbing, but they have been used in extreme traditional climbing routes as a last resort (i.e.hook placements may not withstand a dynamic fall). A particular type of hook is a
rivet hanger that can be attached to old metal rivets–an example being Australian
carrot bolts–permanently fastened into the rock face.[6]
Rock climbing hammers are mainly used by aid climbers to hammer in various types of
pitons while ascending routes; note that
clean aid climbing does not allow the use of hammers as all clean aid equipment must only be inserted on a temporary basis.[6]
Clothing equipment
Rock climbers use a number of pieces of specialized clothing equipment including:
Belay glasses allow the belayer to look up at the lead climber without having to strain their neck upwards (i.e. the glasses are tilted upwards by 45 degrees), and are used when there is extensive belaying such as on long routes, or by climbing instructors.
Belay gloves are used to protect the hands when doing lots of belaying (especially on big wall climbing routes), and their construction from leather or other hard-wearing materials, generally improves grip with the rope, which lessens the risk of a failure of the belay system.
Climbing shoes are designed to increase the friction and thus grip of the foot with the climbing surface by using a sole of vulcanized rubber. Stiffer shoes are used for "edging", and softer soles for "smearing".[35]
Climbing helmets protect the skull against falling debris such as rocks in alpine climbing or dropped pieces of equipment, as well as the impact forces on the head during a fall while climbing, particularly where the falling lead climber is flipped over.[11][35]
Miscellaneous equipment
Bouldering mats are used to protect boulder climbers from the frequent falls that happen in bouldering, which while shorter than other types of climbing, can be onto uneven or hard surfaces from awkward body positions, which could cause ankle or back injuries.
Climbing chalk is used by all rock climbers to absorb moisture on their hands; the chalk is kept in a "chalk bag" that is hung around the waist area. US boulderer
John Gill is largely credited with introducing "gymnastic chalk" to climbing in the 1950s (he was a gymnast himself).[35]
Haul bags are large tubular bags of hardwearing construction (so they can be dragged over rock) into which supplies and climbing equipment can be carried on long multi-pitch routes; commonly used in big wall climbing where they are called "pigs" due to the effort of hauling them up on
pulleys.[22]
Medical tape ("tape" can also refer to webbing), is used by climbers to prevent and repair skin injuries. For example, tape lessens skin damage while
hand jamming on rough granite surfaces; it is also used to cover skin that has been dangerously worn down on the fingers, while
crack climbing.
Nut tools (or "nut key") is a metal tool used to help retrieve nuts and hexes that have become firmly wedged into cracks.
Portaledges are used in big wall climbing as a temporary overnight sleeping or even resting platform (e.g. for long belays).
Pulleys are used by big wall climbers to help bring up
haul bags and other equipment.
Stick clips (or "clip sticks") are long poles with a quickdraw at the end that can be clipped into the first bolt of a sport climbing route from the ground.
Wire brushes are used to clean holds, and particularly at the higher
gradedclimbing routes where the holds are very small and need to be dry and free of any debris or vegetation to be useable; climbers even use
toothbrushes to clean the smallest holds without damaging them.
Training equipment
Various items of equipment are employed during climbing-specific training to strengthen the climber's fingers, tendons and muscles:
Bachar ladder. A narrow flexible (e.g. it can be rolled up) all-metal, or PVC/webbing, ladder that is hung horizontally between two points (but usually with one point higher to create a slope), and where the climber ascends and descends the rungs using only their arm strength (i.e. no use is made of the feet); considered an early version of a campus board but that focused on arm strength and not hand/finger strength.[36]
Campus board. A series of horizontal rungs attached to an overhanging surface that may be climbed up and down without the aid of the feet. When used properly, campus boards improve finger strength and also dynamic or
plyometric, muscle strength.[37]
Grip saver. A small device that can help in developing the antagonist muscles to those used while gripping with the hand. Use of such a device can prevent the ligament injuries that are experienced by climbers.[38]
Hangboard (or "fingerboard"). Subsequent to the development of the campus board, the "hangboard" is focused on building static arm and finger strength; it is a popular training tool for rock climbers and comes in many forms and materials.[39]
^Long, John; Gaines, Bob (August 2022). "Chapter 3: Belay Devices, Carabiners, Slings and Quickdraws". How to Rock Climb (6th ed.).
Falcon Guides. pp. 31–54.
ISBN978-1493056262.