From Wikipedia, the free encyclopedia
Illustration of an example relation on a set A = { a, b, c, d }. An arrow from x to y indicates that the relation holds between x and y. The relation is represented by the set { (a,a), (a,b), (a,d), (b,a), (b,d), (c,b), (d,c), (d,d) } of ordered pairs.

In mathematics, a relation on a set may, or may not, hold between two given members of the set. As an example, "is less than" is a relation on the set of natural numbers; it holds, for instance, between the values 1 and 3 (denoted as 1 < 3), and likewise between 3 and 4 (denoted as 3 < 4), but not between the values 3 and 1 nor between 4 and 4, that is, 3 < 1 and 4 < 4 both evaluate to false. As another example, "is sister of" is a relation on the set of all people, it holds e.g. between Marie Curie and Bronisława Dłuska, and likewise vice versa. Set members may not be in relation "to a certain degree" – either they are in relation or they are not.

Formally, a relation R over a set X can be seen as a set of ordered pairs (x,y) of members of X. [1] The relation R holds between x and y if (x,y) is a member of R. For example, the relation "is less than" on the natural numbers is an infinite set Rless of pairs of natural numbers that contains both (1,3) and (3,4), but neither (3,1) nor (4,4). The relation "is a nontrivial divisor of" on the set of one-digit natural numbers is sufficiently small to be shown here: Rdv = { (2,4), (2,6), (2,8), (3,6), (3,9), (4,8) }; for example 2 is a nontrivial divisor of 8, but not vice versa, hence (2,8) ∈ Rdv, but (8,2) ∉ Rdv.

If R is a relation that holds for x and y one often writes xRy. For most common relations in mathematics, special symbols are introduced, like "<" for "is less than", and "|" for "is a nontrivial divisor of", and, most popular "=" for "is equal to". For example, "1 < 3", "1 is less than 3", and "(1,3) ∈ Rless" mean all the same; some authors also write "(1,3) ∈ (<)".

Various properties of relations are investigated. A relation R is reflexive if xRx holds for all x, and irreflexive if xRx holds for no x. It is symmetric if xRy always implies yRx, and asymmetric if xRy implies that yRx is impossible. It is transitive if xRy and yRz always implies xRz. For example, "is less than" is irreflexive, asymmetric, and transitive, but neither reflexive nor symmetric. "is sister of" is transitive, but neither reflexive (e.g. Pierre Curie is not a sister of himself), nor symmetric, nor asymmetric; while being irreflexive or not may be a matter of definition (is every woman a sister of herself?), "is ancestor of" is transitive, while "is parent of" is not. Mathematical theorems are known about combinations of relation properties, such as "a transitive relation is irreflexive if, and only if, it is asymmetric".

Of particular importance are relations that satisfy certain combinations of properties. A partial order is a relation that is reflexive, antisymmetric, and transitive, [2] an equivalence relation is a relation that is reflexive, symmetric, and transitive, [3] a function is a relation that is univalent and left-total (see below). [4] [5]

Since relations are sets, they can be manipulated using set operations, including union, intersection, and complementation, leading to the algebra of sets. Furthermore, the calculus of relations includes the operations of taking the converse and composing relations. [6] [7] [8]

The above concept of relation [a] has been generalized to admit relations between members of two different sets ( heterogeneous relation, like "lies on" between the set of all points and that of all lines in geometry), relations between three or more sets ( finitary relation, like "person x lives in town y at time z"), and relations between classes [b] (like "is an element of" on the class of all sets, see Binary relation § Sets versus classes).

Definition

Given a set X, a relation R over X is a set of ordered pairs of elements from X, formally: R ⊆ { (x,y) | x, yX }. [1] [9]

The statement (x,y) ∈ R reads "x is R-related to y" and is written in infix notation as xRy. [6] [7] The order of the elements is important; if xy then yRx can be true or false independently of xRy. For example, 3 divides 9, but 9 does not divide 3.

Representation of relations

The representation of the relation Rel = { (x,y) ∈ R × R | x2 + xy + y2 = 1 } as a 2D-plot yields an ellipse.
y
x
1 2 3 4 6 12
1 Yes Yes Yes Yes Yes Yes
2 No Yes No Yes Yes Yes
3 No No Yes No Yes Yes
4 No No No Yes No Yes
6 No No No No Yes Yes
12 No No No No No Yes
Representation of Rdiv
as a Boolean matrix
Representation Rdiv as Hasse diagram (black lines) and directed graph (all lines)

A relation R on a finite set X may be represented as:

  • Directed graph: Each member of X corresponds to a vertex; a directed edge from x to y exists if and only if (x,y) ∈ R.
  • Boolean matrix: The members of X are arranged in some fixed sequence x1, ..., xn; the matrix has dimensions n × n, with the element in line i, column j, being , if (xi,xj) ∈ R, and , otherwise.
  • 2D-plot: As a generalization of a Boolean matrix, a relation on the –infinite– set R of real numbers can be represented as a two-dimensional geometric figure: using Cartesian coordinates, draw a point at (x,y) whenever (x,y) ∈ R.

A transitive [c] relation R on a finite set X may be also represented as

  • Hasse diagram: Each member of X corresponds to a vertex; directed edges are drawn such that a directed path from x to y exists if and only if (x,y) ∈ R. Compared to a directed-graph representation, a Hasse diagram needs fewer edges, leading to a less tangled image. Since the relation "a directed path exists from x to y" is transitive, only transitive relations can be represented in Hasse diagrams. Usually the diagram is laid out such that all edges point in an upward direction, and the arrows are omitted.

For example, on the set of all divisors of 12, define the relation Rdiv by

x Rdiv y if x is a divisor of y and xy.

Formally, X = { 1, 2, 3, 4, 6, 12 } and Rdiv = { (1,2), (1,3), (1,4), (1,6), (1,12), (2,4), (2,6), (2,12), (3,6), (3,12), (4,12), (6,12) }. The representation of Rdiv as a Boolean matrix is shown in the middle table; the representation both as a Hasse diagram and as a directed graph is shown in the left picture.

The following are equivalent:

  • x Rdiv y is true.
  • (x,y) ∈ Rdiv.
  • A path from x to y exists in the Hasse diagram representing Rdiv.
  • An edge from x to y exists in the directed graph representing Rdiv.
  • In the Boolean matrix representing Rdiv, the element in line x, column y is " ".

As another example, define the relation Rel on R by

x Rel y if x2 + xy + y2 = 1.

The representation of Rel as a 2D-plot obtains an ellipse, see right picture. Since R is not finite, neither a directed graph, nor a finite Boolean matrix, not a Hasse diagram can be used to depict Rel.

Properties of relations

Some important properties that a relation R over a set X may have are:

Reflexive
for all xX, xRx. For example, is a reflexive relation but > is not.
Irreflexive (or strict)
for all xX, not xRx. For example, > is an irreflexive relation, but is not.

The previous 2 alternatives are not exhaustive; e.g., the red relation y = x2 given in the diagram below is neither irreflexive, nor reflexive, since it contains the pair (0,0), but not (2,2), respectively.

Symmetric
for all x, yX, if xRy then yRx. For example, "is a blood relative of" is a symmetric relation, because x is a blood relative of y if and only if y is a blood relative of x.
Antisymmetric
for all x, yX, if xRy and yRx then x = y. For example, is an antisymmetric relation; so is >, but vacuously (the condition in the definition is always false). [10]
Asymmetric
for all x, yX, if xRy then not yRx. A relation is asymmetric if and only if it is both antisymmetric and irreflexive. [11] For example, > is an asymmetric relation, but is not.

Again, the previous 3 alternatives are far from being exhaustive; as an example over the natural numbers, the relation xRy defined by x > 2 is neither symmetric (e.g. 5R1, but not 1R5) nor antisymmetric (e.g. 6R4, but also 4R6), let alone asymmetric.

Transitive
for all x, y, zX, if xRy and yRz then xRz. A transitive relation is irreflexive if and only if it is asymmetric. [12] For example, "is ancestor of" is a transitive relation, while "is parent of" is not.
Connected
for all x, yX, if xy then xRy or yRx. For example, on the natural numbers, < is connected, while "is a divisor of" is not (e.g. neither 5R7 nor 7R5).
Strongly connected
for all x, yX, xRy or yRx. For example, on the natural numbers, is strongly connected, but < is not. A relation is strongly connected if, and only if, it is connected and reflexive.
Examples of four types of relations over the real numbers: one-to-one (in green), one-to-many (in blue), many-to-one (in red), many-to-many (in black). 2D-plot representation is used.

Uniqueness properties:

Injective [d] (also called left-unique [13])
For all x, y, zX, if xRy and zRy then x = z. For example, the green and blue relations in the diagram are injective, but the red one is not (as it relates both −1 and 1 to 1), nor is the black one (as it relates both −1 and 1 to 0).
Univalent [8] [d] (also called right-unique, [13] right-definite [14])
For all x, y, zX, if xRy and xRz then y = z. Such a relation is called a partial function. For example, the red and green relations in the diagram are functional, but the blue one is not (as it relates 1 to both −1 and 1), nor is the black one (as it relates 0 to both −1 and 1).

Totality properties:

Serial [d] (also called total or left-total)
For all xX, there exists some yX such that xRy. Such a relation is called a multivalued function. For example, the red and green relations in the diagram are total, but the blue one is not (as it does not relate −1 to any real number), nor is the black one (as it does not relate 2 to any real number). As another example, > is a serial relation over the integers. But it is not a serial relation over the positive integers, because there is no y in the positive integers such that 1 > y. [15] However, < is a serial relation over the positive integers, the rational numbers and the real numbers. Every reflexive relation is serial: for a given x, choose y = x.
Surjective [d] (also called right-total [13] or onto)
For all yY, there exists an xX such that xRy. For example, the green and blue relations in the diagram are surjective, but the red one is not (as it does not relate any real number to −1), nor is the black one (as it does not relate any real number to 2).

Combinations of properties

Relations by property
Example
Partial order Refl Antisym Yes Subset
Strict partial order Irrefl Asym Yes Strict subset
Total order Refl Antisym Yes Yes Alphabetical order
Strict total order Irrefl Asym Yes Yes Strict alphabetical order
Equivalence relation Refl Sym Yes Equality

Relations that satisfy certain combinations of the above properties are particularly useful, and thus have received names by their own.

Equivalence relation
A relation that is reflexive, symmetric, and transitive. It is also a relation that is symmetric, transitive, and serial, since these properties imply reflexivity.

Orderings:

Partial order
A relation that is reflexive, antisymmetric, and transitive.
Strict partial order
A relation that is irreflexive, asymmetric, and transitive.
Total order
A relation that is reflexive, antisymmetric, transitive and connected. [16]
Strict total order
A relation that is irreflexive, asymmetric, transitive and connected.

Uniqueness properties:

One-to-one [d]
Injective and univalent. For example, the green relation in the diagram is one-to-one, but the red, blue and black ones are not.
One-to-many [d]
Injective and not univalent. For example, the blue relation in the diagram is one-to-many, but the red, green and black ones are not.
Many-to-one [d]
Univalent and not injective. For example, the red relation in the diagram is many-to-one, but the green, blue and black ones are not.
Many-to-many [d]
Not injective nor univalent. For example, the black relation in the diagram is many-to-many, but the red, green and blue ones are not.

Uniqueness and totality properties:

A function [d]
A relation that is univalent and total. For example, the red and green relations in the diagram are functions, but the blue and black ones are not.
An injection [d]
A function that is injective. For example, the green relation in the diagram is an injection, but the red, blue and black ones are not.
A surjection [d]
A function that is surjective. For example, the green relation in the diagram is a surjection, but the red, blue and black ones are not.
A bijection [d]
A function that is injective and surjective. For example, the green relation in the diagram is a bijection, but the red, blue and black ones are not.

Operations on relations

Union [e]
If R and S are relations over X then RS = { (x, y) | xRy or xSy } is the union relation of R and S. The identity element of this operation is the empty relation. For example, is the union of < and =, and is the union of > and =.
Intersection [e]
If R and S are relations over X then RS = { (x, y) | xRy and xSy } is the intersection relation of R and S. The identity element of this operation is the universal relation. For example, "is a lower card of the same suit as" is the intersection of "is a lower card than" and "belongs to the same suit as".
Composition [e]
If R and S are relations over X then SR = { (x, z) | there exists yX such that xRy and ySz } (also denoted by R; S) is the relative product of R and S. The identity element is the identity relation. The order of R and S in the notation SR, used here agrees with the standard notational order for composition of functions. For example, the composition "is mother of" "is parent of" yields "is maternal grandparent of", while the composition "is parent of" "is mother of" yields "is grandmother of". For the former case, if x is the parent of y and y is the mother of z, then x is the maternal grandparent of z.
Converse [e]
If R is a relation over sets X and Y then RT = { (y, x) | xRy } is the converse relation of R over Y and X. For example, = is the converse of itself, as is , and < and > are each other's converse, as are and .
Complement [e]
If R is a relation over X then R = { (x, y) | x, yX and not xRy } (also denoted by R or ¬R) is the complementary relation of R. For example, = and are each other's complement, as are and , and , and and , and, for total orders, also < and , and > and . The complement of the converse relation RT is the converse of the complement:
Restriction [e]
If R is a relation over X and S is a subset of X then R|S = { (x, y) | xRy and x, yS } is the restriction relation of R to S. The expression R|S = { (x, y) | xRy and xS } is the left-restriction relation of R to S; the expression R|S = { (x, y) | xRy and yS } is called the right-restriction relation of R to S. If a relation is reflexive, irreflexive, symmetric, antisymmetric, asymmetric, transitive, total, trichotomous, a partial order, total order, strict weak order, total preorder (weak order), or an equivalence relation, then so too are its restrictions. However, the transitive closure of a restriction is a subset of the restriction of the transitive closure, i.e., in general not equal. For example, restricting the relation "x is parent of y" to females yields the relation "x is mother of the woman y"; its transitive closure does not relate a woman with her paternal grandmother. On the other hand, the transitive closure of "is parent of" is "is ancestor of"; its restriction to females does relate a woman with her paternal grandmother.

A relation R over sets X and Y is said to be contained in a relation S over X and Y, written RS, if R is a subset of S, that is, for all xX and yY, if xRy, then xSy. If R is contained in S and S is contained in R, then R and S are called equal written R = S. If R is contained in S but S is not contained in R, then R is said to be smaller than S, written RS. For example, on the rational numbers, the relation > is smaller than , and equal to the composition > ∘ >.

Theorems about relations

  • A relation is asymmetric if, and only if, it is antisymmetric and irreflexive.
  • A transitive relation is irreflexive if, and only if, it is asymmetric.
  • A relation is reflexive if, and only if, its complement is irreflexive.
  • A relation is strongly connected if, and only if, it is connected and reflexive.
  • A relation is equal to its converse if, and only if, it is symmetric.
  • A relation is connected if, and only if, its complement is anti-symmetric.
  • A relation is strongly connected if, and only if, its complement is asymmetric. [17]
  • If relation R is contained in relation S, then
    • If R is reflexive, connected, strongly connected, left-total, or right-total, then so is S.
    • If S is irreflexive, asymmetric, anti-symmetric, left-unique, or right-unique, then so is R.
  • A relation is reflexive, irreflexive, symmetric, asymmetric, anti-symmetric, connected, strongly connected, and transitive if its converse is, respectively.

Examples

Generalizations

The above concept of relation has been generalized to admit relations between members of two different sets. Given sets X and Y, a heterogeneous relation R over X and Y is a subset of { (x,y) | xX, yY }. [1] [18] When X = Y, the relation concept described above is obtained; it is often called homogeneous relation (or endorelation) [19] [20] to distinguish it from its generalization. The above properties and operations that are marked " [d]" and " [e]", respectively, generalize to heterogeneous relations. An example of a heterogeneous relation is "ocean x borders continent y". The best-known examples are functions [f] with distinct domains and ranges, such as sqrt : NR+.

See also

Notes

  1. ^ called "homogeneous binary relation (on sets)" when delineation from its generalizations is important
  2. ^ a generalization of sets
  3. ^ see below
  4. ^ a b c d e f g h i j k l m These properties also generalize to heterogeneous relations.
  5. ^ a b c d e f g This operation also generalizes to heterogeneous relations.
  6. ^ that is, right-unique and left-total heterogeneous relations

References

  1. ^ a b c Codd 1970
  2. ^ Halmos 1968, Ch 14
  3. ^ Halmos 1968, Ch 7
  4. ^ "Relation definition – Math Insight". mathinsight.org. Retrieved 2019-12-11.
  5. ^ Halmos 1968, Ch 8
  6. ^ a b Ernst Schröder (1895) Algebra und Logic der Relative, via Internet Archive
  7. ^ a b C. I. Lewis (1918) A Survey of Symbolic Logic, pp. 269–279, via internet Archive
  8. ^ a b Schmidt 2010, Chapt. 5
  9. ^ Enderton 1977, Ch 3. p. 40
  10. ^ Smith, Eggen & St. Andre 2006, p. 160
  11. ^ Nievergelt 2002, p.  158
  12. ^ Flaška et al. 2007, p.1 Lemma 1.1 (iv). This source refers to asymmetric relations as "strictly antisymmetric".
  13. ^ a b c Kilp, Knauer & Mikhalev 2000, p. 3. The same four definitions appear in the following: Pahl & Damrath 2001, p. 506, Best 1996, pp. 19–21, Riemann 1999, pp. 21–22
  14. ^ Mäs 2007
  15. ^ Yao & Wong 1995
  16. ^ Rosenstein 1982, p. 4
  17. ^ Schmidt & Ströhlein 1993
  18. ^ Enderton 1977, Ch 3. p. 40
  19. ^ Müller 2012, p. 22
  20. ^ Pahl & Damrath 2001, p. 496

Bibliography