Nissan VR engine
Overview
Manufacturer	Nissan ( Nissan Machinery)
Designer	Naoki Nakada [1]
Production	2007–present
Layout
Configuration	60° V6
Displacement	3.0 L (2,997 cc) 3.5 L (3,492 cc) 3.8 L (3,799 cc)
Cylinder bore	86.0 mm (3.39 in) 95.5 mm (3.76 in)
Piston stroke	86.0 mm (3.39 in) 100.2 mm (3.94 in) 88.4 mm (3.48 in)
Cylinder block material	Aluminum
Cylinder head material	Aluminum
Valvetrain	DOHC, 4 valves per cylinder
Compression ratio	9.0:1, 10.3:1
Combustion
Turbocharger	Twin-turbo charged
Fuel system	Multi-point (VR38DETT)/ Direct injection (VR30DDTT)
Fuel type	Gasoline
Cooling system	Water-cooled
Dimensions
Dry weight	429.5 lb (194.8 kg) (VR30DDTT) 608 lb (276 kg) (VR38DETT)
Chronology
Predecessor	Nissan VQ engine, RB26DETT (spiritual)

The VR is a series of twin-turbo DOHC V6 automobile engines from Nissan with displacements of 3.0 and 3.8 L. An evolution of the widely successful VQ series, it also draws on developments from the VRH, JGTC, and Nissan R390 GT1 Le Mans racing engines.

VR30 series

VR30DDTT

Announced by Infiniti on December 15, 2015 the VR30DDTT ^[2] was first made available in the Infiniti Q50 sedan, followed by the Infiniti Q60 coupé a year later. Both platforms come in a 300 and 400 hp (224 and 298 kW) version. ^[3] It is on the Ward's 10 Best Engines list for 2017 and 2018.

Features: ^[4]

• Aluminium block with arc sprayed mirror coating to cylinder bores
• Aluminium cylinder head
• Lightweight resin intake and lower oil pan
• Compact twin direct-mount turbos with integrated exhaust manifold and electronic wastegate actuator
• Twin water-to-air charge coolers with one or two water pumps for the 300 hp (224 kW) and 400 hp (298 kW) variants, respectively
• Electronically controlled variable displacement oil pump
• Intake: electronic Variable valve timing Control (VTC)
• Exhaust: hydraulic continuously variable VTC
• Fuel system: direct injection

Applications:

Years	Model	Power output
2016–present	Infiniti Q50	300–400 hp (224–298 kW)
2017–2022	Infiniti Q60	300–400 hp (224–298 kW)
2019–present	Nissan Skyline	300–400 hp (224–298 kW)
2022–present	Nissan Z	400–420 hp (298–313 kW)

Production

Production of the VR30DDTT engine began in 2016 at the powertrain plant in Iwaki, Fukushima. ^{[5] [6] [7]}

VR35 series

VR35DDTT

The VR35DDTT was announced in March 2024 for the upcoming, third generation Infiniti QX80. It will also be used in the related Nissan Armada/ Patrol. ^[8] It is a larger version of the VR30DDTT and replaces the 5.6-liter VK56 V8 engine in Nissan's largest automobiles. A bore and stroke of 86 mm × 100.2 mm (3.39 in × 3.94 in) makes for an overall displacement of 3.5 L (3,492 cc; 213.1 cu in). ^[9]

Applications:

Years	Model	Power output	Torque	Market
2024–present	Infiniti QX80 (Z63)	336 kW (450 hp) at 5,600 rpm	700 N⋅m (516 lb⋅ft) at 3,600 rpm	North America
2024–present	Nissan Patrol (Y63)	335 kW (449 hp) at 5,600 rpm	698 N⋅m (515 lb⋅ft) at 3,600 rpm [8]	Australia

VR38 series

VR38DETT

Designated the VR38DETT by Nissan, the engine is used from 2007–Present in the Nissan GT-R ^[10] and the limited production Nissan Juke-R.

The VR38DETT featured 24 valves controlled by dual overhead camshafts (2 per cylinder head) with variable valve timing on the intake only. The block is cast aluminium with 0.15 mm (0.0059 in) plasma-sprayed cylinder liner bores. This coating provides a hard protective layer for the piston rings to slide on as the piston moves up and down during its power cycle. The turbine housings for the two IHI turbochargers are integrated into the exhaust manifolds to decrease weight and bolster vehicle balance. The engine also features a pressurized lubrication system controlled thermostatically. The VR38DETT is equipped with a feedback control system that changes air fuel ratio depending on the engine load which has a significant effect on reducing the fuel consumption. ^[11]

Fully equipped with the first set of catalytic converters, turbos, all of the engine driven accessories, front differential assembly, and turbo outlet pipes, the engine weighed 608 lb (276 kg). ^[12]

Other pertinent features of the VR38DETT include:

• Continuously variable valve timing control system ( CVTCS) on intake valves
• Aluminum cylinder block with high-endurance/low-friction plasma-sprayed bores
• Iridium-tipped spark plugs
• Electronic drive-by-wire throttle
• Multi port fuel injection
• Pressurized lubrication system with thermostatically controlled cooling and magnesium oil sump
• Fully symmetrical dual intake and low back-pressure exhaust system
• Secondary air intake system to rapidly heat catalysts to peak cleaning efficiency
• 50 State LEV2/ULEV

Applications:

Years	Model	Power output
2007–present	Nissan GT-R	480–710 hp (358–529 kW)
2011	Nissan Juke-R (only 5 units were produced)	545 hp (406 kW)
2014	Infiniti Q50 Eau Rouge Prototype (Concept car)	560 hp (418 kW)
2023	Praga Bohema	700 hp (522 kW)
Racing:
2012–present	Nissan GT-R Nismo GT3	530–550 hp (395–410 kW)
2014–2021	Renault Sport R.S. 01	550 hp (410 kW) [13]
2017–2019	Ligier Nissan DPi	599 hp (447 kW)

VR38DETT NISMO Engine Tuning Menu Concept (2016)

It is a version of VR38DETT engine used in Nissan GT-R, with GT3-spec camshaft, connecting rod and connecting rod bolt, intercooler, intercooler piping, turbocharger, NISMO 1st and 2nd catalyzers, titanium muffler.

The engine was unveiled in 2016 Tokyo Auto Salon. ^{[14] [15]}

Production

The engines are hand built by five specially trained mechanics called "Takumi Craftsmens" on a special line at Nissan's Yokohama plant and their names are badged on every GT-R engine. The cars are built at their Tochigi plant on a shared production line. ^{[16] [17] [18] [19] [20]}

Engine reference

Engine code	Vehicle	Year	Displacement	Bore x stroke	Weight	C.R.	Max. power	Max. torque	Features
VR30DDTT	Infiniti Q50/ Infiniti Q60 Nissan Skyline Nissan Z (RZ34)	2016-present	2,997 cc (3.0 L; 182.9 cu in)	86 mm × 86 mm (3.39 in × 3.39 in)	approx.429.5 lb (194.8 kg)	10.3:1	300 hp (224 kW) @ 6,400 rpm 400–420 hp (298–313 kW) @ 6,400 rpm (High Output)	295 lb⋅ft (400 N⋅m) @ 1,600-5,200 rpm 350–384 lb⋅ft (475–521 N⋅m) @ 1,600-5,200 rpm (High output)	DOHC per bank Variable inlet and outlet cam phasing Twin Turbo High pressure multi-split direct injection
VR38DETT	Nissan GT-R	2007–present	3,799 cc (3.8 L; 231.8 cu in)	95.5 mm × 88.4 mm (3.76 in × 3.48 in)	approx.608 lb (276 kg)	9.0:1	480–565 hp (358–421 kW) @ 6,400/ 6,800 rpm 600 hp (447 kW) @ 6,800 rpm (NISMO) 711 hp (530 kW) (GT-R50)	430–467 lb⋅ft (583–633 N⋅m) @ 3,200-6,000/ 3,300-5,800 rpm 481 lb⋅ft (652 N⋅m) @ 3,200-5,800 rpm (NISMO) 575 lb⋅ft (780 N⋅m) (GT-R50)	DOHC per bank Variable inlet cam phasing Twin Turbo

See also

• Nissan
• List of Nissan engines
• VQ Series
• Infiniti Q50
• Infiniti Q60
• Nissan Skyline
• Nissan Z (RZ34)
• Nissan GT-R

References