| Colt Model 1855 Sidehammer | |
|---|---|
 Colt Root 1855 Revolver, Model 2, cal .28 | |
| Type | Revolver |
| Place of origin | United States |
| Service history | |
| Used by | United States |
| Wars | American Civil War |
| Production history | |
| Designer | Elisha K. Root and Samuel Colt |
| Designed | 1855 |
| Manufacturer | Colt Firearms |
| Produced | c. 1855–1870 |
| No. built | .28 caliber = 30,000 .31 caliber = 14,000 [1] |
| Specifications | |
| Mass | 17-ounces (3.5-inches octagon barrel) |
| Length | 8-inches (with 3.5-inch barrel) |
| Barrel length | 3.5- or 4.5-inches |
| Caliber | .31 ball/conical bullet, .28 ball/conical bullet |
| Action | Single-action |
| Muzzle velocity | 7-800 feet per second |
| Effective firing range | 25 yards (accurate defense) |
| Feed system | 5-round cylinder |
| Sights | Post front sight, topstrap notch rear sight |
The Colt Model 1855 Sidehammer, also known as the Colt Root Revolver after engineer Elisha K. Root (1808–1865), was a cap & ball single-action pocket revolver used during the American Civil War. It was made by the Colt's Patent Fire Arms Manufacturing Company
Calibers and variants
In the revolver configuration of the patented revolving mechanism, only one model of the revolver was produced. Two calibers for the revolver were: .28 and .31. [2] The production of the revolver started in 1855 and lasted until 1870. [3] In spite of the complexity and ambition of its patented design, the Sidehammer revolver never became a popular gun. [4]
Model series
Production began in 1855 with the Model 1 followed by the Model 1A and then the Model 2 beginning with serial number "1" and ending in 1860 at about "25,000". These models had a roller-die engraved scene referred to as the "Cabin and Indian" scene. Production continued with the Model 3 which has a fluted cylinder [5] [3]
Barrels, cylinders
The standard barrel length was 3-1/2 inches (4-1/2 inches for the Model 5A, 6A, and 7A). Calibers were .28 (Model 1 - 3). .31 (Models 3A, 4, 5, 6, 7). Octagon barrels (Model 1 - 4). Round barrels (Model 5 - 7).
The cylinder scene engraved on the first 25,000 pistols was created by banknote engraver Waterman Ormsby. The image was his fourth and last to be featured on Colt revolvers. The overall scene is 1-1/16 inch wide by 3-1/4 inch long. At one end of the scene is the text, "COLT'S PATENT No. [serial number]". The image contains a pioneer defending himself against an attack by six Indians in Seminole-style attire using a pair of revolver pistols while (presumably) his wife and child are escaping. Along the top of the scene (the edge of the cylinder which is closest to the pistol barrel) is a "finely detailed wavy line and dot border". [5]
Models 3, 4, and 5 had a fluted cylinder (with indentations between the loading chambers), preventing the application of a continuously engraved scene. Some cylinders were decoratively hand-engraved.
Models 6 and 7 had a round cylinder, with the rolled-on "Stagecoach Holdup" scene by W. L. Ormsby.
Influences in later Colt firearms
In 1855, the Sidehammer was the first Colt revolver to use the "creeping" loading lever. This loading mechanism was used again in 1860 in the design of the Colt Army Model 1860, the Colt Navy Model 1861, and the Colt Police Model 1862.
In 1855, the Sidehammer was the first Colt's solid-frame spur-trigger gun. This anatomical characteristic was taken again when the three models of the Colt Derringer started production in 1870. For the two first models production lasted in 1890, and the third model ended in 1912 (until it was re-released in the 1950s for Western movies, under the name of the fourth model Colt Derringer). But in the Colt Derringers, the solid-frame spur-trigger design was still present in the patent when Colt's purchased the National Arms Company in 1870. Actual original Colt models subsequent to the Sidehammer and inheriting a solid frame and a spur trigger were the Colt House (1871) and the Colt New Line (1873). [1]
The revolving mechanism of the cylinder was also used by Colt in the following long arms, in rifle and carbine configurations: [6]
- Colt Model 1855 "First Model" Sporting Rifle
- Colt Model 1855 Half Stock Sporting Rifle
- Colt Model 1855 Full Stock Sporting Rifle
- Colt Model 1855 Military Rifle and Rifled Musket
- Colt Model 1855 Revolving Carbine
- Colt Model 1855 Revolving Shotgun
References
- ^ a b Shideler, Dan (2011). The Gun Digest Book of Guns & Prices 2011. Iola, Wisconsin: Gun Digest Books. p. 241. ISBN 978-1-4402-1890-3.[ permanent dead link]
- ^ Less Common Guns in the Civil War: Colt Model 1855 Sidehammer Revolver Archived 18 November 2012 at the Wayback Machine (a description of the Sidehammer, by writer Emory Hackman)
- ^ a b Norm Flayderman (2007). Flayderman's Guide to Antique American Firearms and Their Values. F+W Media. p. 92. ISBN 978-1-4402-2651-9.
- ^ The Sidehammer as described in the Autry Museum Archived 29 October 2013 at the Wayback Machine, a Museum dealing with the people and the history of the American West
- ^ a b Tobias, Arthur (December 2013). "The Root of the Matter, the Cabin and Indian Scene on Colt's Model 1855 Sidehammer Revolver". Man at Arms. 35 (6): 27–34. Archived from the original on 29 October 2013. Retrieved 28 October 2013.
- ^ Sapp, Rick (2007). Standard Catalog of Colt Firearms. Iola, Wisconsin: F+W Media, Inc. pp. 205–209. ISBN 978-0-89689-534-8.[ permanent dead link]