 | This article includes a list of general
references, but it lacks sufficient corresponding
inline citations. (August 2016) |
Cementitious foam insulation is a cement-based thermal and acoustic insulation, [1] with an R-value similar to that of fiberglass. [2] It is installed as a foam with a consistency like shaving cream, [2] or as pre-cast slabs. [3] The current cost is similar to that of polyurethane foams. [2]
Unlike many foam-in-place polyurethane foams, it is nonflammable and non-toxic. [2] As it is water-based, it offgasses water vapour while curing, requiring ventilation and in some cases a dehumidifier. It cures more slowly than organic foams. However, it does not offgas volatile organic compounds as many organic foams do. Like cement, it is water-soluble until cured, but after curing it is water-resistant, [1] but water-permeable. [4]
It does not expand on setting, but may shrink slightly in open cavities. Structurally, it does not resemble concrete; at the low densities that make it well-insulating, it is quite fragile. It can be crumbled away to re-expose wiring or pipes, making a pile of grey powder. Also unlike concrete, it is quite lightweight. [1]
It is not a new product, having been around for some decades, but exclusive rights to an established cementitious foam product have recently been purchased by a company that has been giving it more publicity. [1]
References
- ^ a b c d "Cementitious Foam Insulation Gets a Second Look". 2 November 2013.
- ^ a b c d Department of Energy. "Insulation Materials". Retrieved 2016-08-17.
- ^ "Foam cement insulation board - Industrial Ceramics". Archived from the original on 2016-10-07. Retrieved 2016-08-17.
- ^ "Ruling No. 10-05-1241 Application No. B-2009-42". Ontario Ministry of Municipal Affairs and Housing, Building Code Commission. Archived from the original on 2018-06-26. Retrieved 2016-08-17.