Cam (mechanism): Difference between revisions
No edit summary |
|||
Line 25: | Line 25: | ||
Certain cams can be characterized by their [[displacement diagrams]], which reflect the changing position a roller follower would make as the cam rotates about an axis. These diagrams relate angular position to the radial displacement experienced at that position. Several key terms are relevant in such a construction of plate cams: [[base circle]], [[prime circle]] (with [[radius]] equal to the sum of the follower radius and the base circle radius), [[pitch curve]] which is the radial curve traced out by applying the radial displacements away from the prime circle across all angles, and the lobe separation angle ('''LSA''' - the angle between two adjacent intake and exhaust cam lobes). Displacement diagrams are traditionally presented as graphs with non-negative values. |
Certain cams can be characterized by their [[displacement diagrams]], which reflect the changing position a roller follower would make as the cam rotates about an axis. These diagrams relate angular position to the radial displacement experienced at that position. Several key terms are relevant in such a construction of plate cams: [[base circle]], [[prime circle]] (with [[radius]] equal to the sum of the follower radius and the base circle radius), [[pitch curve]] which is the radial curve traced out by applying the radial displacements away from the prime circle across all angles, and the lobe separation angle ('''LSA''' - the angle between two adjacent intake and exhaust cam lobes). Displacement diagrams are traditionally presented as graphs with non-negative values. |
||
I think that Caligula created cams so he could eat more McGriddles |
|||
==History== |
==History== |
Revision as of 20:29, 19 November 2010
This article needs additional citations for verification. (December 2008) |
A cam is a rotating or sliding piece in a mechanical linkage used especially in transforming rotary motion into linear motion or vice-versa.[1][2] It is often a part of a rotating wheel (e.g. an eccentric wheel) or shaft (e.g. a cylinder with an irregular shape) that strikes a lever at one or more points on its circular path. The cam can be a simple tooth, as is used to deliver pulses of power to a steam hammer, for example, or an eccentric disc or other shape that produces a smooth reciprocating (back and forth) motion in the follower, which is a lever making contact with the cam.
Overview
The cam can be seen as a device that translates from circular to reciprocating (or sometimes oscillating) motion. A common example is the camshaft of an automobile, which takes the rotary motion of the engine and translates it into the reciprocating motion necessary to operate the intake and exhaust valves of the cylinders.
The opposite operation, translation of reciprocating motion to circular motion, is done by a crank. An example is the crankshaft of a car, which takes the reciprocating motion of the pistons and translates it into the rotary motion necessary to operate the wheels.
Cams can also be viewed as information-storing and -transmitting devices. Examples are the cam-drums that direct the notes of a music box or the movements of a screw machine's various tools and chucks. The information stored and transmitted by the cam is the answer to the question, "What actions should happen, and when?" (Even an automotive camshaft essentially answers that question, although the music box cam is a still-better example in illustrating this concept.)
Certain cams can be characterized by their displacement diagrams, which reflect the changing position a roller follower would make as the cam rotates about an axis. These diagrams relate angular position to the radial displacement experienced at that position. Several key terms are relevant in such a construction of plate cams: base circle, prime circle (with radius equal to the sum of the follower radius and the base circle radius), pitch curve which is the radial curve traced out by applying the radial displacements away from the prime circle across all angles, and the lobe separation angle (LSA - the angle between two adjacent intake and exhaust cam lobes). Displacement diagrams are traditionally presented as graphs with non-negative values.
I think that Caligula created cams so he could eat more McGriddles
History
An early cam was built into Hellenistic water-driven automata from the 3rd century BC.[3] The use of cams was later employed by Al-Jazari who employed them in his own automata.[4] The cam and camshaft appeared in European mechanisms from the 14th century.[5]
See also
- Binary cam, for compound bows
- Cam follower
- Crank
- Dwell cam
- eccentric
- Linkage (mechanical)
- Spring-loaded camming device
- Swashplate
- Trip hammer
- Piston
References
- ^ "cam definition". Merriam Webster. Retrieved 2010-04-05.
a rotating or sliding piece (as an eccentric wheel or a cylinder with an irregular shape) in a mechanical linkage used especially in transforming rotary motion into linear motion or vice versa
- ^ Pennock, G., Shigley, J., & Uicker, J. (2010). Cam Design. Theory of Machines and Mechanisms (4 ed.). Oxford University Press, USA. p. 200.
{{cite book}}
: CS1 maint: multiple names: authors list (link) - ^ Wilson, Andrew (2002): "Machines, Power and the Ancient Economy", The Journal of Roman Studies, Vol. 92, pp. 1–32 (16)
- ^ Georges Ifrah (2001). The Universal History of Computing: From the Abacus to the Quatum Computer, p. 171, Trans. E.F. Harding, John Wiley & Sons, Inc. (See [1])
- ^ A. Lehr (1981), De Geschiedenis van het Astronomisch Kunstuurwerk, p. 227, Den Haag. (See [2])
External links
- How round is your circle? Contains various cam mechanisms
- Kinematic Models for Design Digital Library (KMODDL) - Movies and photos of hundreds of working mechanical-systems models at Cornell University. Also includes an e-book library of classic texts on mechanical design and engineering.