From Wikipedia, the free encyclopedia
(Redirected from C&C 110 Express)

C&C 110
Development
Designer Tim Jackett
Location United States
Year1999
Builder(s) C&C Yachts
NameC&C 110
Boat
Displacement10,900 lb (4,944 kg)
Draft6.50 ft (1.98 m)
Hull
Type Monohull
Construction Fiberglass
LOA36.33 ft (11.07 m)
LWL31.50 ft (9.60 m)
Beam12.00 ft (3.66 m)
Engine typeinboard
Hull appendages
Keel/board typefin keel
Ballast4,200 lb (1,905 kg)
Rudder(s)internally-mounted spade-type rudder
Rig
General Masthead sloop
I foretriangle height51.00 ft (15.54 m)
J foretriangle base14.00 ft (4.27 m)
P mainsail luff45.00 ft (13.72 m)
E mainsail foot15.50 ft (4.72 m)
Sails
Mainsail area348.75 sq ft (32.400 m2)
Jib/ genoa area357.00 sq ft (33.166 m2)
Total sail area705.75 sq ft (65.566 m2)
Racing
PHRF81 (average)

The C&C 110, originally called the 110 Express at introduction, is an American sailboat, that was designed by Tim Jackett and entered production in 1999. [1] [2] [3] [4]

Production

The boat was built by C&C Yachts in the United States, starting in 1999, but it is now out of production. [1] [4] [5]

Design

The C&C 110 is a small recreational keelboat, built predominantly of fiberglass. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 10,900 lb (4,944 kg) and carries 4,200 lb (1,905 kg) of lead ballast. [1] [2] [4]

The first examples built were made with vinylester resin, but in 2002, this was changed to a post cure epoxy to reduce weight. The rudder section was also altered to give better control in higher winds. [1] [4]

The initial standard rig was made by Offshore Spars and was configured with triple spreaders and rod rigging. This was later changed a double spreader rig with wire rigging made by Seldén Mast AB of Sweden, but the Offshore Spars triple spreader rig remained optional. The standard rig was changed to a carbon fiber one in 2004. [1] [4]

A 5 ft (1.52 m) bowsprit was also a factory option. [1]

The design had a choice of keels. When introduced in 1999 there was an option of a standard keel with a draft of 6.00 ft (1.83 m), a shoal draft keel with a draft of 4.83 ft (1.47 m) and a deep keel with a draft of 7.25 ft (2.21 m). In 2001 a newly designed "high performance keel" was introduced with a draft of 6.50 ft (1.98 m) and the deep draft keel was dropped as an option. [1] [4]

The boat was fitted with an inboard engine. Its fuel tank holds 26 U.S. gallons (98 L; 22 imp gal) and the fresh water tank has a capacity of 70 U.S. gallons (260 L; 58 imp gal). [1] [4]

The boat has a PHRF racing average handicap of 81 with a high of 93 and low of 75. It has a hull speed of 7.52 kn (13.93 km/h). [2] [4]

See also

Similar sailboats

References

  1. ^ a b c d e f g h Browning, Randy (2017). "C&C 110 sailboat specifications and details". sailboatdata.com. Archived from the original on 12 March 2022. Retrieved 2 May 2017.
  2. ^ a b c InterVisionSoft LLC (2017). "Sailboat Specifications for C&C 110". Sailing Joy. Retrieved 2 May 2017.[ permanent dead link]
  3. ^ Browning, Randy (2017). "Tim Jackett". sailboatdata.com. Archived from the original on 7 March 2022. Retrieved 1 May 2017.
  4. ^ a b c d e f g h Sea Time Tech, LLC (2022). "C&C 110". sailboat.guide. Archived from the original on 12 March 2022. Retrieved 12 March 2022.
  5. ^ McArthur, Bruce (2022). "C&C Yachts". sailboatdata.com. Archived from the original on 15 October 2020. Retrieved 12 March 2022.