Boron trioxide or diboron trioxide is the
oxide of boron with the formula B2O3. It is a colorless transparent solid, almost always glassy (amorphous), which can be crystallized only with great difficulty. It is also called boric oxide[6] or boria.[7] It has many important industrial applications, chiefly in ceramics as a
flux for glazes and enamels and in the production of
glasses.
Structure
Boron trioxide has three known forms, one amorphous and two crystalline.
Amorphous form
The amorphous form (g-B2O3) is by far the most common. It is thought to be composed of
boroxol rings which are six-membered rings composed of alternating 3-coordinate boron and 2-coordinate oxygen.
Because of the difficulty of building disordered models at the correct density with many boroxol rings, this view was initially controversial, but such models have recently been constructed and exhibit properties in excellent agreement with experiment.[8][9] It is now recognized, from experimental and theoretical studies,[10][11][12][13][14] that the fraction of boron atoms belonging to boroxol rings in glassy B2O3 is somewhere between 0.73 and 0.83, with 0.75 = 3/4 corresponding to a 1:1 ratio between ring and non-ring units. The number of boroxol rings decays in the liquid state with increasing temperature.[15]
Crystalline α form
The crystalline form (α-B2O3) is exclusively composed of BO3 triangles. It crystal structure was initially believed to be the enantiomorphic space groups P31(#144) and P32(#145), like γ-glycine;[16][17] but was later revised to the enantiomorphic space groups P3121(#152) and P3221(#154) in the
trigonal crystal system, like α-
quartz[18]
Crystallization of α-B2O3 from the molten state at ambient pressure is strongly kinetically disfavored (compare liquid and crystal densities). It can be obtained with prologued
annealing of the amorphous solid ~200 °C under at least 10 kbar of pressure.[19][1]
Crystalline β form
The trigonal network undergoes a
coesite-like transformation to
monoclinic β-B2O3 at several gigapascals (9.5 GPa).[20]
Preparation
Boron trioxide is produced by treating
borax with
sulfuric acid in a
fusion furnace. At temperatures above 750 °C, the molten boron oxide layer separates out from
sodium sulfate. It is then decanted, cooled and obtained in 96–97% purity.[3]
Another method is heating
boric acid above ~300 °C. Boric acid will initially decompose into steam, (H2O(g)) and
metaboric acid (HBO2) at around 170 °C, and further heating above 300 °C will produce more steam and diboron trioxide. The reactions are:
H3BO3 → HBO2 + H2O
2 HBO2 → B2O3 + H2O
Boric acid goes to anhydrous microcrystalline B2O3 in a heated fluidized bed.[21] Carefully controlled heating rate avoids gumming as water evolves.
Boron oxide will also form when
diborane (B2H6) reacts with oxygen in the air or trace amounts of moisture:
Molten boron oxide attacks silicates. Containers can be passivated internally with a graphitized carbon layer obtained by thermal decomposition of acetylene.[23]
^
abGurr, G. E.; Montgomery, P. W.; Knutson, C. D.; Gorres, B. T. (1970). "The Crystal Structure of Trigonal Diboron Trioxide". Acta Crystallographica B. 26 (7): 906–915.
doi:
10.1107/S0567740870003369.
^L. McCulloch (1937): "A Crystalline Boric Oxide". Journal of the American Chemical Society, volume 59, issue 12, pages 2650–2652.
doi:
10.1021/ja01291a05
^I.Vishnevetsky and M.Epstein (2015): "Solar carbothermic reduction of alumina, magnesia and boria under vacuum". Solar Energy, volume 111, pages 236-251
doi:
10.1016/j.solener.2014.10.039
^Ferlat, G.; Charpentier, T.; Seitsonen, A. P.; Takada, A.; Lazzeri, M.; Cormier, L.; Calas, G.; Mauri. F. (2008). "Boroxol Rings in Liquid and Vitreous B2O3 from First Principles". Phys. Rev. Lett. 101 (6): 065504.
Bibcode:
2008PhRvL.101f5504F.
doi:
10.1103/PhysRevLett.101.065504.
PMID18764473.
^Hung, I.; et al. (2009). "Determination of the bond-angle distribution in vitreous B2O3 by rotation (DOR) NMR spectroscopy". Journal of Solid State Chemistry. 182 (9): 2402–2408.
Bibcode:
2009JSSCh.182.2402H.
doi:
10.1016/j.jssc.2009.06.025.
^Zwanziger, J. W. (2005). "The NMR response of boroxol rings: a density functional theory study". Solid State Nuclear Magnetic Resonance. 27 (1–2): 5–9.
doi:
10.1016/j.ssnmr.2004.08.004.
PMID15589722.
^Micoulaut, M. (1997). "The structure of vitreous B2O3 obtained from a thermostatistical model of agglomeration". Journal of Molecular Liquids. 71 (2–3): 107–114.
doi:
10.1016/s0167-7322(97)00003-2.
^Gurr, G. E.; Montgomery, P. W.; Knutson, C. D.; Gorres, B. T. (1970). "The crystal structure of trigonal diboron trioxide". Acta Crystallographica B. 26 (7): 906–915.
doi:
10.1107/S0567740870003369.
^Strong, S. L.; Wells, A. F.; Kaplow, R. (1971). "On the crystal structure of B2O3". Acta Crystallographica B. 27 (8): 1662–1663.
doi:
10.1107/S0567740871004515.
^Effenberger, H.; Lengauer, C. L.; Parthé, E. (2001). "Trigonal B2O3 with Higher Space-Group Symmetry: Results of a Reevaluation". Monatshefte für Chemie. 132 (12): 1515–1517.
doi:
10.1007/s007060170008.
S2CID97795834.
^Kocakuşak, S.; Akçay, K.; Ayok, T.; Koöroğlu, H. J.; Koral, M.; Savaşçi, Ö. T.; Tolun, R. (1996). "Production of anhydrous, crystalline boron oxide in fluidized bed reactor". Chemical Engineering and Processing. 35 (4): 311–317.
doi:
10.1016/0255-2701(95)04142-7.