Alameda Corridor
Aerial view showing Alameda Corridor trench in South Los Angeles
Overview
Owner	Alameda Corridor Transportation Authority
Locale	Los Angeles County
Website	acta.org
Service
Type	freight terminal railroad
Operator(s)	BNSF Railroad Union Pacific Railroad Pacific Harbor Line
History
Opened	April 15, 2002; 22 years ago (2002-04-15)
Technical
Line length	20 mi (32 km)
Number of tracks	3
Track gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Operating speed	40 mph (64 km/h)
Route map v t e Legend UP Los Angeles Subdivision BNSF San Bernardino Subdivision UP Wilmington Subdivision Butte Street Yard Harbor Subdivision LACMTA Southeast Gateway Line UP La Habra Subdivision Patata Industrial Lead LACMTA C Line Cargill PCCR USA Reyes Industrial Lead LACMTA A Line Del Amo Industrial Lead UP Wilmington Subdivision Dolores Yard UP Intermodal Container Transfer Facility Harbor Subdivision Wilmington Lead Long Beach Subdivision PHL San Pedro Subdivision Dominguez Channel Manuel Subdivision Henry Ford Bridge Port of Long Beach

The Alameda Corridor is a 20-mile (32 km) freight rail "expressway" ^[1] owned by the Alameda Corridor Transportation Authority ( reporting mark ATAX) that connects the ports of Los Angeles and Long Beach with the transcontinental mainlines of the BNSF Railway and the Union Pacific Railroad that terminate near downtown Los Angeles, California. ^[2] Running largely in a trench below Alameda Street, the corridor was considered one of the region's largest transportation projects when it was constructed in the 1990s and early 2000s. ^[1]

Background

Prior to the construction of the Alameda Corridor, cargo traveling by rail to or from the ports of Los Angeles or Long Beach could be routed along the Atchison, Topeka and Santa Fe Railway's Harbor Subdivision or the Southern Pacific Railroad's tracks down Alameda Street. The Harbor Subdivision was 90 miles (140 km) long, traveling out to the west side of Los Angeles, before turning back east towards the ports. Meanwhile, the Southern Pacific route had more than 200 street-level railroad crossings where automobiles had to wait for lengthy freight trains to pass. ^[3] Many of those same rail lines were inadequately protected with little more than “wigwag” crossing signals dating from the original construction of the lines.

By the early 1990s, the Southern Pacific was in a difficult financial position and sold the Alameda Street corridor to the Ports of Long Beach for US$235 million in December 1994 ($438 million adjusted for inflation). ^[4]

The ports formed the Alameda Corridor Transit Authority to use the newly acquired right-of-way to begin building a freight rail "expressway" from the ports to the major railyards near Downtown Los Angeles. The centerpiece of the new Alameda Corridor would be the "Mid-Corridor Trench" a below-ground, triple-tracked rail line that is 10 miles (16 km) long, 33 feet (10 m) deep, and 50 feet (15 m) wide. ^[5] The trench and the larger Alameda Corridor would allow freight trains to travel 40 miles per hour (64 km/h) without concerns about grade-crossing collisions or having to blow their horns as they travelled through neighborhoods. The corridor would be open to both BNSF Railway and Union Pacific Railroad (UP) trains via trackage rights. ^[1]

The line began operation on April 15, 2002, and reached a peak of 60 train movements per day in October 2006. ^[6] Trains have become much longer since: In 2006, the line carried 19,924 trains carrying 4.9 million twenty-foot equivalent units (TEUs) of containers, while in 2021, only 10,928 trains carried the same 4.9 million TEUs. ^[6]

In 2013, the railroad carried 33% of the freight traveling to and from the Ports of Los Angeles and Long Beach. ^[7] Fifteen percent of the nation’s container traffic travels through the corridor according to the Transit Authority. ^[8]

While the Mid-Corridor trench is the spine of the corridor, the Alameda Corridor Transit Authority also maintains more than 65 miles (105 km) of freight rail track, with 125 turnouts, ten rail bridges, signals at 48 locations, seven grade crossings, and two stormwater pump stations. ^[9]

Additional developments

Alameda Corridor–East

The Alameda Corridor–East project was established in 1998 by the San Gabriel Valley Council of Governments to upgrade over 70 miles (110 km) of railroad tracks in the area east of Downtown Los Angeles. The project includes 19 grade separations and elimination of 23 grade crossings along UP's Alhambra Subdivision and the Los Angeles Subdivision. ^{[10] [11]} The crossings, which were previously at grade, tied up traffic on north–south streets for long periods multiple times a day as long freight trains pass en route to and from the UP yards in Vernon and Commerce. As of 2023, over a dozen grade separations have been completed, with several more under construction or in design. ^[12]

Included as part of the Alameda Corridor–East project is the $336.9 million San Gabriel Trench, which submerged the track between Ramona Street and San Gabriel Boulevard in San Gabriel. ^[13] Construction began in 2012 and was completed in 2017. ^{[14] [15]}

Possible electrification

The Alameda Corridor was built in a way to permit electrification with the use of electric catenary wires, which would increase the environmental benefit by displacing the use of diesel fuel; but the electrification has not happened as of yet. ^[16] This solution has largely been ignored due to lack of familiarity with electric freight technology in North America, although electric freight trains operate in many other parts of the world. Electrification could reduce air pollution in the region, which has been described as a "Diesel Death Zone" due to the pollution from trucks on Interstate 710. ^{[17] [18]}

See also

• Urban freight distribution
• Redondo Junction, California

References

External links

Wikimedia Commons has media related to Alameda Corridor.

• Alameda Corridor Transportation Authority
• Alameda Corridor East (the ACE Project)