This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  "R10" New York City Subway car –  news · newspapers · books · scholar · JSTOR (February 2018) ( Learn how and when to remove this template message)

R10
R10 car 3184 at Sheepshead Bay on the Train of Many Metals in 2018
Interior view of R10 car 3184
In service	1948–1989
Manufacturer	American Car & Foundry
Constructed	1948–1949
Entered service	November 20, 1948
Refurbished	1984–1986
Scrapped	1983–1984, 1988–1993
Number built	400
Number preserved	2
Number scrapped	398
Successor	R46 R68 R68A
Formation	Single units
Fleet numbers	1948–1970: 1803–1852 and 3000–3349 1970–1989: 2950–2974, 3000–3049, 3100–3224 (WH); 2975–2999, 3050–3099, 3225–3349 (GE)
Capacity	56 (seated)
Operators	NYC Board of Transportation New York City Transit Authority
Specifications
Car body construction	LAHT Carbon steel
Car length	60.3 ft (18.38 m)
Width	10 ft (3.05 m)
Height	12.2 ft (3.72 m)
Platform height	3.76 ft (1.15 m)
Doors	8 sets of 50 inch wide side doors per car
Maximum speed	55 mph (89 km/h)
Weight	81,200 lb (36,832 kg)
Traction system	General Electric cars: GE PCM type 17KG116A switch group, with 17KC76A1 master controller, using GE 1240-A3 motors (100 hp or 75 kW each). All four axles motorized. Westinghouse cars: WH ABS type UP-631-A switch group, with XM-179 master controller, using Westinghouse 1447-A motors (100 hp (75 kW) each). All four axles motorized.
Power output	100 hp (75 kW) per traction motor
Acceleration	2.5 mph/s (4.0 km/(h⋅s))
Auxiliaries	Edison B4H (32 Volt) battery with 24 cells.
Electric system(s)	600 V DC Third rail
Current collector(s)	Top running Contact shoe
Braking system(s)	WABCO SMEE Braking System
Coupling system	WABCO H2C
Track gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge

The R10 was the first series of post-war New York City Subway cars. They were built by the American Car and Foundry Company from 1948 to 1949 for the IND/ BMT B Division. A total of 400 cars were built, arranged as single units. Two versions were manufactured: Westinghouse (WH)-powered cars and General Electric (GE)-powered cars. The R10s introduced many innovations, including an all-welded low-alloy high tensile (LAHT) steel construction, dynamic braking, improved propulsion, and various cosmetic features.

The first R10s entered service on November 20, 1948. Various modifications were made over the years to the R10 fleet, and about 110 cars were lightly overhauled in 1984–1986. Some R10s were replaced by the R46s in the late 1970s; the remaining cars, despite having low reliability rates, outlasted several newer car classes. The remaining R10s were replaced by the R68s and R68As and last ran on October 29, 1989. Two cars have been preserved, while the rest were scrapped.

Description

The R10s were originally numbered 1803–1852 and 3000–3349. Cars 1803–1852 were renumbered 2950–2999 in 1970.

As the first series of post-war subway cars, the R10s introduced many innovations. For the first time, the car body was of an all-welded low-alloy high tensile (LAHT) steel construction. This gave the body great strength, as the body and underframe were welded together to form a single, durable, and rigid car body, which had strong structural integrity. The R10s also featured a new type of braking system known as the "SMEE" schedule braking, which introduced dynamic braking. Dynamic braking reduced wear and tear on brake shoes, reducing maintenance costs. Improved propulsion, in the form of four 100 horsepower (75 kW) traction motors design, instead of the traditional two 190 hp (140 kW) motors (the setup used in the R1–9 fleet), improved acceleration from 1.75 miles per hour per second (2.82 km/(h⋅s)) to the current 2.5 mph/s (4.0 km/(h⋅s)). They also featured roofline side destination signs, an arrangement that drew criticism. The R10s were also the first subway cars to incorporate roller bearings, instead of the standard friction bearings found on all older railway stock, as well as being the last subway cars ordered with air-operated door engines. Additionally, the R10s were the first subway cars to be equipped with air horns, as opposed to the air whistles that were found on all pre-war subway cars. Finally, the cars introduced the General Steel Industries cast steel truck frame design also used on many passenger cars and coaches up until the R68As in 1988. Sealed beam headlights were installed on all cars of this class starting in 1956.

These cars were nicknamed "Thunderbirds" by their operating personnel and railfans because of the cars' high speeds.

Although the they could operate in mixed consists of later SMEE cars, the R10s, for the most part, ran in solid consists throughout their careers. They were briefly mixed with fifty R16s assigned to the A in the late 1950s, and with the R42s assigned to the A during 1969–1970.

The R10s bore several paint schemes during their service lives. The cars were delivered in two-tone grey with orange stripes. In 1964, nine of these cars were painted red with black roofs and black skirts (1822, 1825, 1850, 3099, 3101, 3137, 3234, 3334, 3342). During the following year, two versions of the original paint scheme were tested, with 3037 in a lighter gray and 3218 in a darker gray. On car 3133, the orange painted-on stripe was replaced by an attached orange plastic strip along the sides of the car. From 1965–1966, they were repainted into an aqua blue/white scheme, directly replicating that of the World’s Fair R33s and R36s. The first car to be so painted, 3331, additionally sported a TA seal on the end. The following year, the fleet was redone in this scheme on this occasion without the extra aqua blue stripe. These cars variously had aqua blue roofs or white roofs; 19 of these cars received gray roofs and gray skirts. ^[a] Beginning in 1970, they were repainted into the MTA's silver with blue stripe scheme. Toward the end of their lives, 110 Westinghouse units that went under the GOH program were painted with a green body, a silver roof, and a black front hood.

The original interior paint scheme was blue and gray, conducted with various experiments of this nature. While 1848 was all blue inside, 3219 was painted with bright orange and blue around 1964. When the cars were painted with silver and blue outside, the interiors received a light gray and pale green paint scheme (on car 1806, which was 2953 by this time, a dark gray was used). At a later date, the original blue and gray scheme resumed being used once again. The rattan seats also received treatment on certain cars, with 3050 in green coloring, whereas 3210 in a bright blue color.

Other features to be noted were a pair of stainless steel doors that were tested on car 3119, ventilation louvres that were inserted into the side doors on car 3138, and three cross seats that were extended to permit seating by three people on car 3189. These were done during the 1970s.

The R10 was the last B-Division car to have seats that had thick strand woven cloths covering the entire seat.

History

Pre-introduction

In 1947, following an accident in 1946, R7A car 1575 was rebuilt from its original appearance by ACF and became the prototype for the R10. The car was designed to test new interior and cosmetic features. After it was rebuilt, 1575 re-entered service on June 30, 1947; however, while it cosmetically resembled an R10, mechanically and electrically, it was still an R7A and could only operate with other pre-war IND R1–9 fleet cars. ^{[1] [2]}

Delivery and revenue service

The R10s first ran in service on the A route on November 20, 1948. They were initially the mainstay, and were exclusively assigned to this train, where they remained for almost 30 years, and became synonymous with that route for more than 20 years. During these early years, they made occasional appearances on the AA service (especially on weekends) and the rush hour BB service.

Thirty cars, numbered 3320–3349 were transferred to the BMT Eastern Division ^[3] in 1954, and primarily used on Broadway–Jamaica service to help familiarize crews with SMEE equipment in anticipation of the arrival of the R16 cars, whereupon they were returned to normal IND service.

Then, some R10s were finally displaced from the A beginning in 1969, when brand new R42 cars, R44 cars, and displaced R40 cars were transferred from Jamaica Yard beginning on September 13, 1977 ^[4] (which was, in turn, receiving brand new R46s were directly assigned to the A (so that the A train could be equipped with some air-conditioned cars). Many of these displaced R10s were then often used on the B and later, the rush hours-only CC (now the C). During 1978–1979, 2950–2999 were also transferred to Jamaica Yard for use on the GG (now the G Brooklyn/Queens Crosstown Local). Ultimately, the fleet was essentially assigned to the CC and GG service; however, during the R46 truck crisis, they needed to be placed back into regular A service as its R44s were moved to Jamaica Yard for service on the E, F, GG, and N. ^[5] Many R10s were used for a few weeks on the D, then for a slightly longer period on the E and F, until the truck crisis was resolved and the R10s were once again, for the most part back, on the CC and GG with only occasional usage on the A until April 1983. ^[6]

In 1975, car 3192 had a new R42 type front installed; it was a prototype car for a complete rebuilding of the fleet, which would add modern interiors and air-conditioning. The unit was scrapped in 1980 inside Coney Island Yard and the rebuilding program never took place with the other cars because of the higher cost of rebuilding the cars as opposed to purchasing new cars. ^{[7] [8]}

There was a light overhaul program for 110 of the WH-powered cars between December 1984 and February 1986 in an effort to get the entire fleet in a non-graffiti state. The rehabilitation of the select R10s was done in-house at a budgeted cost of $65,000 per car.

Retirement

Approximately 53 R10s were replaced by the R46s in 1977–8. While the remaining cars may have been considered the second worst operating revenue service car during the 1980s based on MDBF (Mean Distance Between Failures), doing better than only the R46s, many R10s outlasted the newer R11s and R16s.

The remaining R10s were replaced by the R68s and R68As. The last train of GE-powered R10s and non-overhauled WH-powered R10s ran on November 10, 1988, ten days short of the 40th anniversary of their debut. This was an official date; some were still operating in service as late as February 1989. The rebuilt WH-powered R10s were withdrawn from March 1989 to September 8, 1989, when the last revenue service train ran on the C. On October 29, 1989, a train of R10s (3018-3203-3182-2974-3143-3045-3145-3216) led one final farewell excursion run on various IND-BMT Division routes, including the then-new IND 63rd Street Line. ^{[9] [10]}

After retirement, most cars were sent to what is now Sims Metal Management's Newark facility to be scrapped and processed. Most R10s were scrapped by June 1990; the last R10 to be taken off property was 3081, the last GE-powered car in existence. It was scrapped sometime in 1993.

Two cars have been preserved:

• Car 3184 has been preserved by the Railway Preservation Corp. and was previously displayed at the New York Transit Museum. It was repainted into its original two-tone gray and orange striped paint scheme, similar to R7A 1575. The car was restored to operating status in 2017 and has been operating on New York City Transit Museum-sponsored excursions since July 2017, specifically on the Train of Many Metals (TOMM).
• Car 3189 has been preserved by the New York Transit Museum. The car had an experimental 3-passenger transverse fiberglass interior seating installed in 1969, which has since been removed. It was retired from revenue service in 1984, but was later repainted solid blue and used as a training car for road car inspectors at the TA's Pitkin Yard in Brooklyn. The car was restored to operating status in 2022 – during which the car was repainted into the aqua blue/white scheme – and has been operating on New York Transit Museum-sponsored excursions since September 2022. ^[11]

References

Further reading

• Sansone, Gene (1997). Evolution of New York City subways: An illustrated history of New York City's transit cars, 1867–1997. New York: New York Transit Museum Press. ISBN  978-0-9637492-8-4.

External links

Wikimedia Commons has media related to R10 (New York City Subway car).

• R10 cars at nycsubway.org
• They Moved Millions
• Picture of R10 train on LL line during 1979-1984 period