A mortiseand tenon (occasionally mortice and tenon)
joint connects two pieces of
wood or other material.
Woodworkers around the world have used it for thousands of years to join pieces of wood, mainly when the adjoining pieces connect at right angles.
Mortise and tenon joints are strong and stable joints that can be used in many projects. They furnish a strong outcome and connect by either gluing or locking into place. The mortise and tenon joint also gives an attractive look. One drawback to this joint is the difficulty in making it because of the precise measuring and tight cutting required. In its most basic form, a mortise and tenon joint is both simple and strong. There are many variations of this type of joint, and the basic mortise and tenon has two components:
the mortise hole, and
the tenon tongue.
The tenon, formed on the end of a member generally referred to as a rail, fits into a square or rectangular hole cut into the other, corresponding member. The tenon is cut to fit the mortise hole exactly. It usually has shoulders that seat when the joint fully enters the mortise hole. The joint may be glued, pinned, or wedged to lock it in place.
This joint is also used with other materials. For example, it is traditionally used by both
stonemasons and
blacksmiths.
Etymology
The noun mortise, "a hole or groove in which something is fitted to form a joint", comes from
c. 1400 from
Old French'mortaise' (13th century), possibly from
Arabic'murtazz', "fastened", past participle of 'razza', "cut a mortise in".[1] The word tenon, a noun in English since the late 14th century, developed its sense of "a projection inserted to make a joint" from the Old French 'tenir' "to hold".[2]
History and ancient examples
The mortise and tenon joint is an ancient joint. One of the earliest mortise-tenon structure examples dates back 7,000 years to the Hemudu culture in China's Zhejiang Province.[3] Tusked joints were found in a well near
Leipzig,[4] created by early
NeolithicLinear Pottery culture, and used in construction of the wooden lining of the wells.[5] Mortise and tenon joints have also been found joining the wooden planks of the "
Khufu ship",[6] a 43.6 m (143 ft) long vessel sealed into a pit in the
Giza pyramid complex of the
Fourth Dynasty around 2500 BC. They were also found in the
Uluburun shipwreck (14th century BC).[7]
Mortise and tenon joints have also been found in
ancient furniture from archaeological sites in the Middle East, Europe and Asia. Many instances are found, for example, in ruins of houses in the
Silk Road kingdom of
Cadota, dating from the first to the 4th century BC.[8] In traditional
Chinese architecture, wood components such as beams, brackets, roof frames, and struts were made to interlock with perfect fit, without using fasteners or glues, enabling the wood to expand and contract according to humidity.[9] Archaeological evidence from Chinese sites shows that, by the end of the Neolithic, mortise and tenon joinery was employed in Chinese construction.[10]
The thirty
sarsen stones of Stonehenge were dressed and fashioned with mortise and tenon joints before they were erected between 2600 and 2400 BC.[11]
A variation of the mortise and tenon technique, called
Phoenician joints (from the Latin coagmenta punicana)[12][13] was extensively used in ancient
shipbuilding to assemble
hull planks and other watercraft components together. It is a locked (pegged) mortise and tenon technique that consists of cutting two mortises into the edges of two planks; a separate rectangular tenon is then inserted in the two mortises. The assembly is then locked in place by driving a dowel through one or more holes drilled through mortise side wall and tenon.[14][15]
Description
Generally, the size of the mortise and tenon is related to the thickness of the timbers. It is good practice to proportion the tenon as one third the thickness of the rail, or as close to this as is practical. The haunch, the cut-away part of a
sash corner joint that prevents the tenon coming loose, is one third the length of the tenon and one-sixth of the width of the tenon in its depth. The remaining two-thirds of the rail, the tenon shoulders, help to counteract lateral forces that might tweak the tenon from the mortise, contributing to its strength. These also serve to hide imperfections in the opening of the mortise.
Types
Mortises
A mortise is a hole cut into a timber to receive a tenon. There are several kinds of mortise:[16]
Open mortise: a mortise that has only three sides. (See
bridle joint).
Stub mortise: a shallow mortise, the depth of which depends on the size of the timber; also a mortise that does not go through the workpiece (as opposed to a "through mortise").
Through mortise: a mortise that passes entirely through a piece.
Wedged half-
dovetail: a mortise in which the back is wider, or taller, than the front, or opening. The space for the wedge initially leaves room to insert the tenon. The wedge, after the tenon is engaged, prevents its withdrawal.
Through-wedged half-dovetail: a wedged half-dovetail mortise that passes entirely through the piece.
Tenons
A tenon is a projection on the end of a timber for insertion into a mortise. Usually, the tenon is taller than it is wide. There are several kinds of tenons:
Stub tenon: a short tenon, the depth of which depends on the size of the timber; also a tenon that is shorter than the width of the mortised piece so the tenon does not show (as opposed to a "through tenon").
Through tenon: a tenon that passes entirely through the piece of wood it is inserted into, being clearly visible on the rear side.
Loose tenon: a tenon that is a separate part of the joint, as opposed to a fixed tenon that is an integral part of one of the pieces to be joined.
Biscuit tenon: a thin oval piece of wood, shaped like a biscuit[17]
Pegged (or pinned) tenon: the joint is strengthened by driving a peg or
dowel pin (
treenail) through one or more holes drilled through the mortise side wall and tenon;[18] this is common in
timber framing joints.
Tusk tenon: a kind of mortise and tenon joint that uses a wedge-shaped key to hold the joint together.
Teasel (or teazle) tenon: a term used for the tenon on top of a jowled or gunstock post, which is typically received by the mortise in the underside of a
tie beam. A common element of the English tying joint.
Top tenon: the tenon that occurs on top of a post.
Hammer-headed tenon: a method of forming a tenon joint when the shoulders cannot be tightened with a
clamp.
Half shoulder tenon: an asymmetric tenon with a shoulder on one side only. A common use is in framed, ledged, and braced doors.
Gallery
A traditional through, wedged, mortise and tenon joint
A stub tenon corner joint
A haunched stub tenon corner joint
A foxtail wedged tenon joint
A pinned corner tenon joint
A modern feather tenon joint (primarily called a loose tenon)
^Pulak, Cemal (1998). "The Uluburun Shipwreck: An Overview". The International Journal of Nautical Archaeology. 27 (3): 210.
doi:
10.1111/j.1095-9270.1998.tb00803.x. Pegged mortise-and-tenon joints similar to those used in Graeco-Roman ships of later centuries fasten its planks together and to the keel.
^Teague, Matthew (2007-05-01).
"The Pegged Joint, Exposed". FineWoodworking. Taunton Press.
Archived from the original on 2020-09-25. Retrieved 2021-04-28.