From Wikipedia, the free encyclopedia
Eagle Vision
Overview
Manufacturer Chrysler Corporation
Also calledChrysler Vision (Europe)
Production1992–September 5, 1997
Model years1993–1997
Assembly Brampton Assembly in Brampton, Ontario, Canada
Body and chassis
Class Full size luxury car
Body style4-door sedan
Layout Longitudinal front-engine, front-wheel drive
Platform Chrysler LH platform
Related
Powertrain
Engine
Transmission4-speed 42LE automatic
Dimensions
Wheelbase113.0 in (2,870 mm) [1]
Length201.6 in (5,121 mm)
Width74.4 in (1,890 mm)
Height
  • MY 1993-94: 55.8 in (1,417 mm)
  • MY 1995-97: 56.3 in (1,430 mm)
Curb weight3,371 lb (1,529 kg)
Chronology
Predecessor Eagle Premier
Successor Chrysler 300M

The Eagle Vision is a full-sized, front-wheel drive four-door sports sedan produced from 1992 until 1997. It was marketed by Eagle, replacing the AMC/ Renault-designed Eagle Premier (from which the Vision was derived). The Eagle Vision was badged as the Chrysler Vision in Europe. The Vision debuted at the 1992 North American International Auto Show in Detroit. As one of the LH sedans, it was Automobile Magazine's Automobile of the Year in 1993, and ultimately the only Eagle model to be completely designed and built in-house by Chrysler.

Design background

1995 Eagle Vision TSi rear

The Vision's design can be traced to 1986, when Chrysler designer Kevin Verduyn completed the initial exterior design of a new aerodynamic concept sedan called Navajo. The design never passed the clay model stage.

It was also at this time that the Chrysler Corporation purchased bankrupt Italian sports car manufacturer Lamborghini. The Navajo's exterior design was reworked and became the Lamborghini Portofino, released as a concept at the 1987 Frankfurt Auto Show. The Portofino was heralded as a design triumph, setting in motion Chrysler's decision to produce a production sedan with the Portofino's revolutionary exterior design, called " cab forward”.

This design was characterized by the long, low-slung windshield, and relatively short overhangs. The wheels were effectively pushed to the corners of the car, creating a larger passenger cabin compared to contemporary vehicles in its class.

Design of the chassis began in the late 1980s, after Chrysler had bought another automaker: American Motors Corporation (AMC) in 1987, from which the Eagle division is derived. During this time, Chrysler began designing the replacement for the Dodge Dynasty and Chrysler Fifth Avenue as well as a potential Plymouth. The initial design of Dodge's LH bore resemblance to the Dynasty, and this design was scrapped entirely after François Castaing, formerly AMC's Vice President of product engineering and development, became Chrysler's Vice President of vehicle engineering in 1988. The new design, under Castaing's leadership, began with the Eagle Premier.

The chassis design was continually refined throughout the following years, as it underpinned more Chrysler concepts: the 1989 Chrysler Millennium and 1990 Eagle Optima. The Premier's longitudinal engine mounting layout was inherited, as was the front suspension geometry, and parts of the braking system. The chassis itself became a flexible architecture capable of supporting front or rear-wheel drive (designated "LH" and "LX" respectively). The transmission was inspired by the Premier's Audi and ZF automatics. Borrowing heavily from Chrysler's A604 (41TE) " Ultradrive" transversely mounted automatic, it became the A606 (also known as 42LE).

1995 Eagle Vision ESi

By 1990, it was decided that the new technologically advanced car would need a new technologically advanced engine to power it. Until that time, the only engine confirmed for use was Chrysler's 3.3 L pushrod V6. The 3.3 L engine's 60° block was bored out to 3.5 L, while the pushrod-actuated valves were replaced with SOHC cylinder heads with four valves per cylinder, creating an advanced 3.5 L V6.

The appearance, still based on the cab forward exterior design of the 1987 Lamborghini Portofino concept, with its aerodynamic shape, made for little wind noise inside this large car. The engineering and sleek styling gives the Vision a low drag coefficient (0.31), on par with the Porsche 997.

Without badges, the Vision could easily pass as a (first-generation) Concorde. The main difference between the two are the taillight clusters. Like the European sedans it was marketed to compete against, the Vision incorporates rear amber turn signals over the Concorde's red ones. Neither does the Vision have the Concorde's faux rear lightbar between the taillights. While the two cars share headlights, the Vision's grille is smaller and, separated by its prominent center badge, has been likened to the appearance of "nostrils." The interior of the Vision is nearly identical to the Concorde, the biggest difference being the absence of the Concorde's faux wood trim and steering wheel emblem. Unlike the Vision, the Concorde never offered the AutoStick option. Marketed as a sports sedan, the Vision offered only bucket seats with a console, never the split bench with column shift.

The Vision featured a monochromatic design inside and out, with no brand or model badge on the doors (as found on the Concorde), and available aluminum wheels with a simple design. The single color motif was more pronounced on models without the grey lower body trim paint scheme. In keeping with its high-performance image, the Vision was the only LH sedan to come standard with "touring" suspension. [2] "Performance" suspension was an available option on the Vision. [2]

The upscale TSi model featured leather-trimmed seats, 8-way power seats for both the driver and front passenger, leather-wrapped steering wheel, leather shift knob, cloth door inserts, rear seat vents, center rear armrest, and personal reading lamps.

Power windows and central door locks were standard for both trims, as were dual airbags, with remote keyless entry available as an option. Among other factory-installed sound systems available, was the top-of-the-line Infinity sound system which included 8 speakers positioned throughout the cabin along with an equalizer. Head units included a radio with either cassette or CD playback and a maximum five-band adjustable graphic equalizer.

1993–1995 Eagle Vision with grey lower body trim
Chrysler Vision in Poland

The TSi model was distinguishable as it did not have a fixed mast antenna, but a retractable power antenna that stored itself inside the rear passenger-side fender. Anti-lock brakes ( ABS) were standard, with traction control optional. [3]

Dual-way power sunroofs were available on this car in either trim. They were designed and installed by American Sunroof Corp. (now ASC Global) from its Columbus, Ohio plant, not by Mopar itself. An installed sunroof eliminated most of the front overhead console that featured storage bins for a garage door opener and sunglasses. However, the Overhead Travel Information System (OTIS), an onboard computer with integrated map lights, was retained.

The Vision was generally the middle offering of the original three LH cars, with the ESi starting between a base Intrepid and a base Concorde (usually just under the Concorde by a few hundred dollars). However, the TSi's base price was more than a base Concorde. Other LH cars, the New Yorker and LHS, started higher than the Vision.

Trims

  • ESi - 1993–1997
  • TSi - 1993–1997

Drivetrains

The Eagle Vision ESi came equipped with a 3.3 L V6 engine initially rated 153 bhp (114 kW) which was raised to 162 bhp (121 kW) in the 1994 and 1995 models. For 1996, it lost 4 hp (3 kW), but gained 9 ft·lbf of torque. The TSi featured the more powerful SOHC 24-valve 3.5 L V6 engine rated at 214 bhp (160 kW).

Both engines included a 4-speed automatic transmission. The 1996 and 1997 TSi with its 3.5 had the 4-speed AutoStick option featuring a unique PRNDL mechanism invented by Peter Gruich.

  • 3.3 L V6 – Horsepower and Torque: 153 bhp (114 kW) & 177 lb⋅ft (240 N⋅m) (1992–93), 162 bhp (121 kW) & 194 lb⋅ft (263 N⋅m) (1994–1995) and, 158 bhp (118 kW) & 203 lb⋅ft (275 N⋅m) (1996–1997)
  • 3.5 L V6 – 214 bhp (160 kW) & 221 lb⋅ft (300 N⋅m)

The 3.3 L engine was engineered to run on 87 octane gasoline, while the larger 3.5 requires mid-grade 89 octane fuel as a minimum, but benefits from premium 91 octane fuel.

Year-to-year changes

1994

  • Variable-assist power steering was available, providing more feel at higher speeds. Both models now wore the same lower-body cladding, minimizing the evident differences between the ESi and TSi. The 3.3 L engine's power output was increased by 8 hp, while the 4-speed automatic transmission was revised for smoother shifting.

1995

  • New standard features included heated power exterior rear-view mirrors, power windows, and an AM/FM stereo with a cassette player. The 3.5  engine became available as an upgrade option for the ESi trim level.

1996

  • A new Autostick shifting feature became available for the TSi trim. The car could be "manually" shifted by tilting the shift knob right or left to change gears up or down. Plastic lower trim was deleted in favor of body color lower trim for a monochromatic color scheme. The Pentastar logo previously present on the front fenders in front of the doors was deleted. Windshield wiper jets were moved from the wiper arms to the hood. All 1996 Eagle Visions were made OBD-II compliant.
  • The headlights are now more powerful.

1997

  • Only minor changes were made to the 1997 Vision. After this model year, the Vision was discontinued.

Discontinuation

The Vision sold around 105,000 units, from 1993 to 1997, and Chrysler was planning to continue it to redesign the LH cars for 1998. Some prototypes featured the Eagle logo, and Vision production continued into September 1997 to offer dealers an adequate amount of 1997 models, until the introduction redesigned 1998 Vision. However, Chrysler made the decision to stop production of the Vision and Talon (Eagle's only other model by then) with the last unit built on September 5, 1997. On September 29, 1997, the automaker notified 2,340 U.S. and 337 Canadian dealers that the Eagle brand would be discontinued by the end of the 1998 model year. [4] [5] [6]

The car that was planned to be the redesigned Vision, became the 1999 model year Chrysler 300M. [7] It was released a year after the other redesigned LH cars in 1998. [8]

Production Figures:

Eagle Vision Production Figures [9]
Yearly Total
1993 28,678
1994 22,064
1995 25,128
1996 12,806
1997 5,874
Total 94,550

Awards

Nameplate use

In Mexico, the 2015 model of the Fiat Siena has been marketed as the Dodge Vision. [10]

References

  1. ^ "1995 Eagle Vision brochure". oldcarbrochures.org. pp. 24–25. Retrieved 22 July 2022.
  2. ^ a b "Development of the Body Shell, Suspension, and Steering of the Chrysler LH Series (Dodge Intrepid, Chrysler Concorde, Eagle Vision)". Allpar. Retrieved 8 May 2015.
  3. ^ "1993–1997 Eagle Vision Road Tests". consumerguideauto.howstuffworks.com. 23 November 2008. Archived from the original on 6 December 2011. Retrieved 22 July 2022.
  4. ^ Foster, Patrick R. (2013). American Motors Corporation: The Rise and Fall of America's Last Independent Automaker. Motorbooks. p. 203. ISBN  9780760344255. Retrieved 2 July 2017.
  5. ^ McDonough, John; Egolf, Karen (2015). The Advertising Age Encyclopedia of Advertising. Routledge. ISBN  9781135949136. Retrieved 2 July 2017.
  6. ^ "Chrysler to Discontinue Eagle Brand at End of 1998 Model Year" (Press release). The Auto Channel. Chrysler Corporation. 29 September 1997. Retrieved 2 July 2017.
  7. ^ "Chrysler 300M cars: big, luxury-tinged sporty sedans". allpar.com. 16 November 2020. Retrieved 22 July 2022.
  8. ^ Ackerson, Robert (2005). Chrysler 300 Series: Pedigree, Power and Performance Since 1955. Veloce Publishing. p. 122. ISBN  9781904788904.
  9. ^ Flammang, James M.; Kowalke, Ron (1999). Standard Catalog of American cars, 1976-1999 (Third ed.). Krause Publications. ISBN  9780873417556.
  10. ^ "Dodge Vision 2015 llega a México en $198,900 pesos" (in Spanish). 22 January 2015. Retrieved 22 July 2022.

External links